Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Raymienets on 29 September 2012, 19:55:32
-
Decided to turn over the miggy as she has lay in the drive for about a month. Had to give her a jump as the battery was flat. She started no bother but the problem is that the hazards wont stop flashing. Ant ideas anyone.
-
Assuming you still have the powersounder connected try hitting the switch on & off a few times
-
PS disconnected a long time ago.
-
Sounds like the indicators are flashing the alarm (obviously silent due to no PS). If switching hazards on/off a few times doesn`t stop them you can pull the relay that controls the alarm indicators.
-
Sounds like the indicators are flashing the alarm (obviously silent due to no PS). If switching hazards on/off a few times doesn`t stop them you can pull the relay that controls the alarm indicators.
Cheers Rob, which relay is it. Under dash or in box at battery?
-
Sounds like the alarm has been acticvated but is silent due to missing ps.
Re set it be locking / unlocking with the blipper...? Will need a sufficiently charged battery though. No ...?
-
Sounds like the alarm has been acticvated but is silent due to missing ps.
Re set it be locking / unlocking with the blipper...? Will need a sufficiently charged battery though. No ...?
Cheers Chris
-
If it is the alarm, then the alarm horn is knackered as well...