Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: grafter on 18 October 2012, 16:21:56

Title: 2.2 dti y22dth engine,waterpump help plz
Post by: grafter on 18 October 2012, 16:21:56

hi looking for the sizes of the torx bits needed to remove and refit the water pump,i know there are 6 bolts and the pulley 3 are torx bits not sure on the size's and for the bolts holding the waterpump to the block........many thanks if you can help me out  :y

Title: Re: 2.2 dti y22dth engine,waterpump help plz
Post by: Elite Pete on 18 October 2012, 18:54:23

I've never done one but I can look on the breaker I have tomorrow ;)

Title: Re: 2.2 dti y22dth engine,waterpump help plz
Post by: grafter on 18 October 2012, 19:19:51

yeh brilliant thanks,im stuck in france and just want to get the wright tools to do it cuz bin qoated over 250 quid to have it replaced and its easy to do,looked on amazon and the pump is 23 quid and thats on its way to me  :y

Title: Re: 2.2 dti y22dth engine,waterpump help plz
Post by: Brikhead on 18 October 2012, 21:20:18

You can buy a set of ten for six pound odd...
http://www.amazon.co.uk/Am-Tech-8-inch-Sockets-Female-Pieces/dp/B002SY9MIW/ref=sr_1_1?ie=UTF8&qid=1350591472&sr=8-1