Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Marks DTM Calib on 25 April 2008, 13:57:16
-
Ok, just a quick post to see that we have everything required, I ahve got the following
1 pair of re-built 3.0 heads.
1 pair of exhaust manifolds
Full set of spare lifters
Spare bolts
Green Goo
Black Goo
Grey Goo
Flange sealent
Assorted O rings
Grease,
Copper slip
loctite thread lock
Full tool kit
Tap and die set
Torque wrenches
Misc spares
Cam cover gasket kit
Head bolts
I am not bringing my jack and stands (which we will need)
If we can get a list of tiems on here so I cna just check we have everything
-
I will bring 1 o-ring for the thermostat ;D
Supply of coke
Camera
Can chuck my tools, jack and stands in if it helps.
-
I don't actually see "new head gaskets" on that list ........ but perhaps I'm blind ...... :)
As won't be there I'll get back in me box ...
Good luck fellas :)
:y :y
-
Suspect Jaime will have those and coolant etc
-
Jamie should have:
2 off headgaskets for a 3.0
2 off exhaust manifold to head gaskets
2 off exhaust manifold to front pipe gaskets
4 off coolant bridge dowty washers
4 off oil cooler to oil pipe metal washers
1 off coolant transfer pipe to block rubber seal
Oil
Oil filter
Anti freze
Sump plug washer
Water pump? (dont recall)
2 off stat housing to bridge pipe seals
I also have an oil cooler on sale or return
-
Ow yes, 2 quid for me breakfast buttie.
-
Ive got
Set camcover gaskets
Full tool kit
axle stands and jack
black goo
Loctite 598 goo
stud lock
two torque wrenches
carb cleaner
gallon of diesel
oil and filter
exhaust manifold to downpipe gasket
and most importantly some pocket money for some bacon butties :y
-
A message for you Mark.... if its not too much trouble and you have them, please can you bring a strobe light, a vac gauge and if you have one, a 32mm viscous fan coupling spanner? ::)
-
A message for you Mark.... if its not too much trouble and you have them, please can you bring a strobe light, a vac gauge and if you have one, a 32mm viscous fan coupling spanner? ::)
32mm spanner might be an issue.....got a strobe light and vac gauge though so will put them in.
-
Just being nosey, but who's having a head gasket change? :-?
-
Just being nosey, but who's having a head gasket change? :-?
The Boy......it would appear that he has a wetness problem.
-
Is this tommorow by any chance?
-
Is this tommorow by any chance?
Yep.......at your friendly local barn.... :y
-
Just being nosey, but who's having a head gasket change? :-?
The Boy......it would appear that he has a wetness problem.
Ahh.....the usual then! ::) ;D
-
Just being nosey, but who's having a head gasket change? :-?
and Timbuk ::)
-
If i can get my pas sorted i'll pop down just to be nosey and take some pics :y
-
I'll be in Chester all weekend, otherwise I'd come to raise some spirits.
-
I'll be in Chester all weekend, otherwise I'd come to raise some spirits.
I wont ;D
-
oh another message >:(
Can someone bring a compression tester please ;D
-
oh another message >:(
Can someone bring a compression tester please ;D
Its in.....this coffee had better be good ;)
-
oh another message >:(
Can someone bring a compression tester please ;D
Its in.....this coffee had better be good ;)
[/highlight]
It will be mark because i shall be making and chocolate cake to go with it it ;)
-
oh another message >:(
Can someone bring a compression tester please ;D
Its in.....this coffee had better be good ;)
[/highlight]
It will be mark because i shall be making and chocolate cake to go with it it ;)
I love you...... :) :y
-
Jamie should have:
2 off headgaskets for a 3.0 CHECK
2 off exhaust manifold to head gaskets CHECK
2 off exhaust manifold to front pipe gaskets CHECK
4 off coolant bridge dowty washers CHECK
4 off oil cooler to oil pipe metal washers CHECK
1 off coolant transfer pipe to block rubber seal CHECK
Oil CHECK
Oil filter CHECK - 7l
Anti freze CHECK - 10l (plus 20l of water to get me there :o)
Sump plug washer - N/A - newer type with rubber seal
Water pump? (dont recall) - CHECK
2 off stat housing to bridge pipe seals - CHECK
I also have an oil cooler on sale or return
And stat. You saif you had a new transfer pipe for stat if reqd?
-
Ok, just a quick post to see that we have everything required, I ahve got the following
1 pair of re-built 3.0 heads.
1 pair of exhaust manifolds
Full set of spare lifters
Spare bolts
Green Goo
Black Goo
Grey Goo
Flange sealent
Assorted O rings
Grease,
Copper slip
loctite thread lock
Full tool kit
Tap and die set
Torque wrenches
Misc spares
Cam cover gasket kit
Head bolts
I am not bringing my jack and stands (which we will need) <<< packed
If we can get a list of tiems on here so I cna just check we have everything
-
Just being nosey, but who's having a head gasket change? :-?
The Boy......it would appear that he has a wetness problem.
It happens at my age....
-
Maria - I have an adjustable that goes to 32mm (as my viccy fan is 32mm), though its a bit wide if its tight. I'll throw it in car anyway.
-
If anyone thinks of anything else, please send me a text msg.
Timbuk/Mark/Pete/Jimbob - send me the postcode by text msg, can't remember way (yes, navigation has made me lazy :-[)
-
i was gonna go for brekkie in shifnal 2mora as i was on that run till someone cried at work and got put on the handsworth run instead... >:( >:(
-
If anyone thinks of anything else, please send me a text msg.
Timbuk/Mark/Pete/Jimbob - send me the postcode by text msg, can't remember way (yes, navigation has made me lazy :-[)
Done :y
Unit 20A
Lambsledge Lane Ind Est
Shifnal
TF11 8SD
-
A message for you Mark.... if its not too much trouble and you have them, please can you bring a strobe light, a vac gauge and if you have one, a 32mm viscous fan coupling spanner? ::)
Is this spanner needed for the land rover Maria?
I will bring mine :y
-
Make sure you have more than one T55 bit between you in case of breakages