Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: geoffr70 on 29 October 2012, 12:59:39

Title: How the hell do you get no 2 ht lead back on?
Post by: geoffr70 on 29 October 2012, 12:59:39

Hi peeps putting back together after chànging cam cover. The ht leads were tight when I took them off but now for some reason no 2 won't go back on. There's just not enough slack to get it in the hole square on over the plug, I've checked for slack at the back. Any ideas? Thanks

Title: Re: How the hell do you get no 2 ht lead back on?
Post by: feeutfo on 29 October 2012, 13:10:58

Wrong lead for that pot? Ie, there's a longer lead being used on a pot that's nearer the dis PAC...?

Or, the routing is wrong, maybe?

Title: Re: How the hell do you get no 2 ht lead back on?
Post by: geoffr70 on 29 October 2012, 18:37:12

I tried all different routes! Luckily back on now, very tight, probably too tight infact!

Title: Re: How the hell do you get no 2 ht lead back on?
Post by: feeutfo on 29 October 2012, 19:40:47

Are they original and therefor numbered? Guessing not? :-\

Title: Re: How the hell do you get no 2 ht lead back on?
Post by: geoffr70 on 29 October 2012, 20:10:36

Yeah they're numbered, just tight! Back on now though ::)