Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: martin341 on 02 November 2012, 17:00:20

Title: ABS
Post by: martin341 on 02 November 2012, 17:00:20

Hei!

Once again i´m looking for advice. Question is: Can one fit a pre-facelift Omega ABS-control unit(the "Brain") in facelift Omega? Are they same?
And where can i find a wiring diagram of ABS for facelift Omega. If i am very lucky(probably noooot :'() then there is only a broken wire or something but i do not want to go "blind" and rip the whole car apart. So if anyone can help-> PM.

Cheers,
Martin

Title: Re: ABS
Post by: Andy B on 02 November 2012, 17:15:58

Early pre mini face lift will be different, they're only 3 channel ABS systems whereas the facelift is 4 channel. Miniface lifts are 4 channel systems too, but don't know if they the same as face lift though  :-\

Title: Re: ABS
Post by: RobG on 02 November 2012, 18:24:09

Quote from: Andy B on 02 November 2012, 17:15:58

Early pre mini face lift will be different, they're only 3 channel ABS systems whereas the facelift is 4 channel. Miniface lifts are 4 channel systems too, but don't know if they the same as face lift though  :-\

Will be OK, obviously same spec from donor ;)

Title: Re: ABS
Post by: martin341 on 02 November 2012, 21:21:29

Thanks for reply!

So if i take the ABS-box from lets say 97-98 Omega its plug´n´play? And how about TC and cruise control, does these features have to be in the car that i take the part from or it doesn´t matter?

Cheers,

Martin

Title: Re: ABS
Post by: biggriffin on 02 November 2012, 22:56:49

 cruise control on 97-98 is cable/servo operated.  on dbw its ecu controled.

Title: Re: ABS
Post by: TheBoy on 03 November 2012, 20:22:15

Quote from: martin341 on 02 November 2012, 21:21:29

Thanks for reply!

So if i take the ABS-box from lets say 97-98 Omega its plug´n´play? And how about TC and cruise control, does these features have to be in the car that i take the part from or it doesn´t matter?

Cheers,

Martin

Borderline. If last LETTER of VIN is W ot X, the ABS unit should be interchangable, assuming the engine is same.

Title: Re: ABS
Post by: martin341 on 06 November 2012, 14:36:32

Hei,

Is this the right part number for me: Bosch 0273004206


Cheers,
Martin