Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: vauxsky on 28 November 2012, 14:56:03

Title: V6 2.5 Multiram - Air Flow Pipe Configuration
Post by: vauxsky on 28 November 2012, 14:56:03

Hi, I believe I have mixed up the V6 Multiram - Air Flow Pipe Configuration - while changing my Auxilary Drive Belt/Serpentine belt, those little pipes that I would call Vacum pipes coming out of the front, right hand side and to the bottom of the Multiram.

I know most are obvious but the ones on the top could get mixed and I wondered if there was a picture so I could double check, thank you.

Also I may have broken the switch behind the multiram about half way down, which has a white vacum pipe connection, can anyone tell me what this is called please.

cheers

Title: Re: V6 2.5 Multiram - Air Flow Pipe Configuration
Post by: YZ250 on 28 November 2012, 14:59:50

Is this of any use to you.

 http://www.omegaowners.com/forum/index.php?topic=90499.0

Title: Re: V6 2.5 Multiram - Air Flow Pipe Configuration
Post by: vauxsky on 28 November 2012, 15:11:32

Hi, thanks, I dont think that is what I am looking for, I already looked at that, I need a clearer picture if possible of the engine bay with connections if possible.

thank you