Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: amba on 28 November 2012, 21:33:31

Title: Out side temp sensor
Post by: amba on 28 November 2012, 21:33:31

Dash display has been stuck on 12.5c for most of the day despite being sure it was much colder than that ::).

Tonight it changed down to 11.5c but this is still a long way off correct >:(

Does this sound like a new sensor is required or can the display be reset some how as have pressed end of steering column stalk but makes no difference.  :(

Title: Re: Out side temp sensor
Post by: symes on 28 November 2012, 21:51:28

mine started doing that then went minus ??? then went F
so got new sensor-still F
followed wiring back to multi plug ended up cutting plug off and soldering the wires together NOW fine :) :y
But that was my ******* silver shed aka miggy

Title: Re: Out side temp sensor
Post by: Keith ABS on 01 December 2012, 09:49:11

    I had the same problem. Corrosion of the multiplug teminals is the cause. they can be cleaned but may have to be cut and remade off if severe.
Keith B