Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: car5car on 29 December 2012, 02:39:30
-
I need to adjust wheels.
Thanks.
-
Your not going to get it very close DIY, the Omega/Catera is quite fussy when it comes to this. You want a full geometry done, at a specialist.
Through years of trial and error, OOF actually have their own values outside manufacture specs, when people use a particular specialist here.
This was my before & after result:
(https://dl.dropbox.com/u/803897/Omega/WIM/wim_small.jpg)
-
Thanks.
I do alignment on my driveway for 2 reasons:
1. People, who do it professionally in my area, are idiots.
2. I adjust camber and caster even if they are not adjustable.
-
Thanks.
I do alignment on my driveway for 2 reasons:
1. People, who do it professionally in my area, are idiots.
2. I adjust camber and caster even if they are not adjustable.
caster is adjustable by moving the subframe first.
But yes, the correct equipment rarely means a correct set up. Although if they have the settings above, they should be able to achieve them.
-
Bet he uses his special bit of string ;D ;D ;D ;D ;)
-
Ah yes, old rope, clever stuff. Worth a few quid in the right application apparently. :)
-
Ah yes, old rope, clever stuff. Worth a few quid in the right application apparently. :)
Only with oily rag thrown in foc ;)
-
Thanks.
I do alignment on my driveway for 2 reasons:
1. People, who do it professionally in my area, are idiots.
2. I adjust camber and caster even if they are not adjustable.
That is the case around here too, only one place I trust, its quite a drive, but worth it.
Maybe worth some investigating to really find a decent place :)
-
Bet he uses his special bit of string ;D ;D ;D ;D ;)
Yes, I do. How do you know? :y
-
Bet he uses his special bit of string ;D ;D ;D ;D ;)
Yes, I do. How do you know? :y
Lucky guess mate ::) ::)