Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Elite Pete on 17 January 2013, 08:51:33

Title: TID to MID
Post by: Elite Pete on 17 January 2013, 08:51:33
Is it possible to swap the faulty TID in my GLS wheesel for a MID. I have a couple of good MIDs with a good length of loom wiring. I know i'm not going to get all the info because the sensors aren't there but what comes up on the TID is fine, I just want to be able to see it without bits missing ;D
Title: Re: TID to MID
Post by: 05omegav6 on 17 January 2013, 09:55:59
For the bare bones, compare and dismantle the two plugs, and using my guide, remove the excess wires from the MID plug, then one by one, substitute the remaining MID wires with the wires from the the TID plug.

Rebuild the MID plug and that should see that sorted. :y

You might wish to connect the wiring for a MID stalk, if onlyto be able to cancel all the check messages ::)
Title: Re: TID to MID
Post by: Elite Pete on 17 January 2013, 11:40:51
Brilliant, thanks for that :y
Title: Re: TID to MID
Post by: TheBoy on 17 January 2013, 18:16:58
You might wish to connect the wiring for a MID stalk, if onlyto be able to cancel all the check messages ::)
Or short out the relevent wires.