Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: dazzle72 on 21 January 2013, 19:21:27
-
Got the blowing exhaust manifold done and had codes re-read today as eml came back on. Something to do with cat efficiency which means we need a new cat so I'm told. Is this correct?? Oh, and since the code read this morning the spanner symbol stays on on start up. Switching off and restarting puts it out.
-
does your exhaust have a leak-split on flexi?
-
blowing manifold will cause the engine to run rich which could damage the cat but normally this is over a long period of having a blow. I would check that the manifold has been fitted correctly as a first port of call
-
Thanks for the replies guys, most appreciated. Hopefully doing the rocker cover gasket this week with a mate whos more clued up than me, so we'll have a good look
-
Do not replace the cat with an aftermarket one ;)
-
Do not replace the cat with an aftermarket one ;)
waste of time+money =total rubbish :y
-
Do not replace the cat section. Aftermarket are worse than than a shagged genuine
-
I'll check whats already been suggested, then re-post with my findings. Fingers crossed it wont need a cat, but thats a bridge to cross if needed
-
0420 .. put some higher spec fuel in .. shell v-max or similar and drive it like you stole it for a tank full ... :)
Not guaranteed to sort it but often does, another way is to put 1600kgs of caravan on the back and go up Birdlip Hill at 50 .. :) IME that sorts it out really well :) (but don't look at the fuel consumption gauge while you do it !!!)
-
I'll try different fuel and see what happens. Thanks for the tip