Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kinni on 23 January 2013, 20:03:34

Title: Air flow meter omega a 2.4i-2.6i
Post by: kinni on 23 January 2013, 20:03:34

Hi friends. I don`t know is that the right place about my question, but do you know is there any difference between omega a 2.4i and 2.6 i Air flow meters. Will a have any problems if i put 2.4 Air flow meter on 2.6 engine?
Tnx.

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: TheBoy on 23 January 2013, 20:06:23

Omega A is Vauxhall Carlton in UK :)

Hopefully somebody knows the answer

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: kinni on 23 January 2013, 20:09:33

Quote from: TheBoy on 23 January 2013, 20:06:23

Omega A is Vauxhall Carlton in UK :)

Hopefully somebody knows the answer

:y correct  :)

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: doz on 23 January 2013, 21:00:09

2.4 is a 4 banger. 2.6 straight 6. 2.4 was a low compression run on any kinda of grotty fuel available. I doubt air mass meters are inter-changeable

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: 2woody on 23 January 2013, 21:48:15

2.4 never available in UK.

AndyC might know - pm him

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: doz on 23 January 2013, 21:51:54

No it wasn't

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: kinni on 23 January 2013, 22:15:25

Quote from: doz on 23 January 2013, 21:00:09

2.4 is a 4 banger. 2.6 straight 6. 2.4 was a low compression run on any kinda of grotty fuel available. I doubt air mass meters are inter-changeable

True, but c24ne and c26ne has the same compression Ratio : 9.2. Number of cylinder is not important. c20ne flow meter is the same as c30ne`s i think...I wonder will c24ne`s flow meter work properly on c26ne, cause the last one is out.

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: mmcg on 23 January 2013, 22:20:38

Was the 2.4 fitted to Frontera .

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: doz on 23 January 2013, 22:22:56

Thought the Funtractor 2.4 was an 16 valve lump?

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: 2woody on 23 January 2013, 22:26:45

Funtractor 2.4 was indeed 8-valve

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: Marks DTM Calib on 24 January 2013, 11:07:38

Quote from: mmcg on 23 January 2013, 22:20:38

Was the 2.4 fitted to Frontera .

yes it was, 2.4 8 valve cam in head unit (C24NE) as used in the Long Wheel base Frontera A, mega long stroke and hence good low down torque.

The vx part number for the 2.4 is 93174460 (and is very F-expensive!)

The vx part number for the 2.6 I cant find.

Title: Re: Air flow meter omega a 2.4i-2.6i
Post by: Marks DTM Calib on 24 January 2013, 11:13:44

Quote from: doz on 23 January 2013, 22:22:56

Thought the Funtractor 2.4 was an 16 valve lump?

No 16V power plants on the Frontera A  :y