Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: wesagog on 06 February 2013, 19:32:09

Title: Paper Clip Test Not Work
Post by: wesagog on 06 February 2013, 19:32:09
Hi,
I'm trying to do the paper clip test for my Omega B, 1996, 2.0L but no any response noticed...
any help pls.
Title: Re: Paper Clip Test Not Work
Post by: noel on 06 February 2013, 19:37:58
i assume you are doing the paper clip test without the engine running :-\,it will only work with the ignition on and no engine running  HTH  :y

this link may help    http://www.omegaowners.com/forum/index.php?topic=90581.0
Title: Re: Paper Clip Test Not Work
Post by: wesagog on 06 February 2013, 19:48:25
No, I did it according to the instructions, and I used to do it before that many times... but now there is no response...
Title: Re: Paper Clip Test Not Work
Post by: TheBoy on 06 February 2013, 20:14:30
Does yours normally have 2 digit fault codes, or 4 digit fault codes?

If the latter, it just means no (recent) stored faults :)
Title: Re: Paper Clip Test Not Work
Post by: wesagog on 06 February 2013, 20:32:08
It's 2 digit codes and I did it many times before, now it's not work and it's even didn't give Start Test Code (12)
Title: Re: Paper Clip Test Not Work
Post by: Entwood on 06 February 2013, 20:33:39
metal paperclip ?? not a plastic covered one ???
Title: Re: Paper Clip Test Not Work
Post by: Abiton on 06 February 2013, 20:34:10
Bulb blown. More than likely.
Title: Re: Paper Clip Test Not Work
Post by: wesagog on 07 February 2013, 14:40:12
Dears,
Sure, I use metal paper clip and no any blown bulb...
I really need your advice... please
Title: Re: Paper Clip Test Not Work
Post by: TheBoy on 07 February 2013, 18:41:53
Where are you?
Title: Re: Paper Clip Test Not Work
Post by: wesagog on 07 February 2013, 18:57:48
Baghdad, Iraq
Title: Re: Paper Clip Test Not Work
Post by: OmegaAnglesey on 07 February 2013, 19:01:02
Baghdad, Iraq
I don't think anyone on OOF is close enough  :-\
Title: Re: Paper Clip Test Not Work
Post by: Abiton on 07 February 2013, 19:05:52
Dears,
Sure, I use metal paper clip and no any blown bulb...
I really need your advice... please


Are you saying that the bulb which illuminates the Engine Management Light has been tested/checked, and it definitely works, since this 'paperclip test not working' has been observed?
Title: Re: Paper Clip Test Not Work
Post by: TheBoy on 07 February 2013, 19:22:32
Baghdad, Iraq
Ah, yes, a bit of a trek from England ;D