Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: avalanche247 on 12 February 2013, 18:26:11

Title: ISO wiring question 1999 opel omega
Post by: avalanche247 on 12 February 2013, 18:26:11
Hi guys, ive been trying to connect my alpine head unit to my opel omega and so far im getting no power to it.  It currently has the standard philips tape player which works fine.  In the back of the iso block one of the black wires has been stripped abit and another black wire coming from somewhere else has been soldered onto it (I have a picture if someone can tell me how to upload it i will).

The head unit was working when I took it from my peugeot, but I haven't had a chance to test it in another car yet, so it could be broken, but that mystery wire is confusing me.

Does anyone know what wires do what in the iso block? Then i can make sure that they are corresponding correctly to the ones in my alpine loom.

I understand that its probably mostly vauxhauls on this site and mine is an opel originally from belgium, but I think il have more luck talking to you guys first!

Any help would be great, thanks a lot!
Title: Re: ISO wiring question 1999 opel omega
Post by: dbug on 12 February 2013, 19:01:52
DaveDND will be able to help - pm him ;)
Title: Re: ISO wiring question 1999 opel omega
Post by: TheBoy on 12 February 2013, 19:04:42
Vauxhalls (and Opels) tend to not entirely follow the ISO standard, with 12v and ign reversed
Title: Re: ISO wiring question 1999 opel omega
Post by: tidla on 12 February 2013, 22:32:51
Im sure a cheap multimeter could help.
Title: Re: ISO wiring question 1999 opel omega
Post by: Dave DND on 12 February 2013, 22:55:05
Multimeter is going to be essential for diagnosis

(http://i19.photobucket.com/albums/b156/Budgie590/Omega_SW_Ctrls_Small.jpg)
Title: Re: ISO wiring question 1999 opel omega
Post by: Dave DND on 12 February 2013, 22:56:22
Not my diagram, but a good place to start
Title: Re: ISO wiring question 1999 opel omega
Post by: plym ian on 13 February 2013, 19:43:53
when fitting my kenwood from my vectra I had the same problem which I couldn't find took me ages to figure out that the fuse had blown on the actual stereo ::)
Title: Re: ISO wiring question 1999 opel omega
Post by: avalanche247 on 17 February 2013, 17:38:42
Cheers for the info guys, unfortunately ive been really busy this past week and the girlfriends been using the car all the other time, I will try and compare mine to that diagram some time this week.

And fuse on the head unit is fine by the way!