Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: 05omegav6 on 14 February 2013, 10:47:37

Title: Lpg Partial install Q
Post by: 05omegav6 on 14 February 2013, 10:47:37

Will be changing the front bumper on my car shortly. While doing that there's a couple of bits I need to fit behind the bumper, so am planning to install the LPG loom/ecu while I'm at it. I also have some dash wiring to do, so could conceivably fit the entire LPG electrickery :-\

So the question is: If I fit the Stag Ecu and loom, does it matter if I connect the petrol injection loom without connecting the 12v feed/leave the fuse out?

TIA, Al :y

Title: Re: Lpg Partial install Q
Post by: feeutfo on 14 February 2013, 12:07:43

No doesn't matter, so long as the weather doesn't get into the open plugs and cause corrosion.

(I never removed the bumper to fit mine btw) :)

Title: Re: Lpg Partial install Q
Post by: 05omegav6 on 14 February 2013, 12:19:36

Ta :y

Bumper coming off anyway ;)

Title: Re: Lpg Partial install Q
Post by: Lazydocker on 14 February 2013, 22:19:46

Fit away... The LPG ECU is in the "pass through" state when without power :y

Title: Re: Lpg Partial install Q
Post by: 05omegav6 on 15 February 2013, 03:05:57

Quote from: Lazydocker on 14 February 2013, 22:19:46

Fit away... The LPG ECU is in the "pass through" state when without power :y

 :y