Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: GastronomicKleptomaniac on 19 February 2013, 19:36:06

Title: Wtd - heater matrix hoses
Post by: GastronomicKleptomaniac on 19 February 2013, 19:36:06
I'm after a pair of hoses with connections where they go into the bulkhead, condition unimportant so long as I get the connection with a few inches of rubber pipe. Ta muchly in advance :y
Title: Re: Wtd - heater matrix hoses
Post by: Lazydocker on 19 February 2013, 22:28:45
The short hose was only about £12 new a couple of years ago
Title: Re: Wtd - heater matrix hoses
Post by: albitz on 19 February 2013, 23:13:22
May have a pair here.Will have a look in the morning. :y
Title: Re: Wtd - heater matrix hoses
Post by: albitz on 20 February 2013, 11:50:44
Looks like I dont have a good pair,sorry.
Title: Re: Wtd - heater matrix hoses
Post by: GastronomicKleptomaniac on 20 February 2013, 14:35:43
Looks like I dont have a good pair,sorry.

Even an average pair I can glob together with rubber and tape? It's purely to get a good connection to flush the matrix out once, hence I don't want to spend too much. :y
Title: Re: Wtd - heater matrix hoses
Post by: albitz on 21 February 2013, 00:38:16
If you just want to flush the matrix any piece of hose held on with a hose clip or even a cable tie should do. :-\
Title: Re: Wtd - heater matrix hoses
Post by: GastronomicKleptomaniac on 21 February 2013, 13:10:05
If you just want to flush the matrix any piece of hose held on with a hose clip or even a cable tie should do. :-\

I might well just do that then - ta mate! :y