Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: LFF64 on 02 March 2013, 13:34:14

Title: Won't start
Post by: LFF64 on 02 March 2013, 13:34:14
Help just been out to start car and it won't
Battery is brand new and cranks over really well just won't fire up the only code I can find is P1890 throttle position ?? I cleared this but still no joy
I have tried both keys just in case it's that but still no good
Any ideas anyone please
Title: Re: Won't start
Post by: dbug on 02 March 2013, 14:58:17
Crank sensor ;)
Title: Re: Won't start
Post by: JamesV6CDX on 02 March 2013, 17:42:01
Almost cert crank sensor. I'm back in Aylesbury Sunday onwards if you need a hand anytime :y
Title: Re: Won't start
Post by: LFF64 on 02 March 2013, 17:56:59
Bugger looks like I will be after a crank sensor are they likely to have these in stock at dealers
I am not desperate to use the car as I have the Frontera luckily
Title: Re: Won't start
Post by: LFF64 on 02 March 2013, 17:58:26
I seem to remember reading that its not the sensor that fails but the wiring so I will have a look at this before I go ahead and buy a new one
Title: Re: Won't start
Post by: Paddy Flannery on 02 March 2013, 18:09:11
See if this is still available ? ........

http://www.omegaowners.com/forum/index.php?topic=112451.0
Title: Re: Won't start
Post by: LFF64 on 02 March 2013, 18:16:09
Thanks for that but it's the wrong part number for mine  ::)
Title: Re: Won't start
Post by: Paddy Flannery on 02 March 2013, 18:20:04
Sorry, only it was that part number I put on my 2.6 CD a couple of months ago when it played up like, yours. Worth a try.
Title: Re: Won't start
Post by: Paddy Flannery on 02 March 2013, 18:22:17
I don't know the exact number but it did finish 743.  :y
Title: Re: Won't start
Post by: TheBoy on 02 March 2013, 19:05:28
I have a spare crank sensor here (cheaper version)
Title: Re: Won't start
Post by: LFF64 on 02 March 2013, 19:50:02
2.6i 24v - Y26SE    Bosch    9118140    £73.00    £65.70   £56.77   
Title: Re: Won't start
Post by: LFF64 on 03 March 2013, 15:45:49
Is there a how to for the crank shaft sensor
Title: Re: Won't start
Post by: noel on 03 March 2013, 17:24:24
Is there a how to for the crank shaft sensor
http://www.omegaowners.com/forum/index.php?topic=90540.0    :y
Title: Re: Won't start
Post by: LFF64 on 04 March 2013, 11:10:25
Thank
I couldn't find that  :-[  sensor on order it's not a stocked item won't get it until Wednesday morning
And to add insult to injury I have a puncture  ::)
Title: Re: Won't start
Post by: LFF64 on 07 March 2013, 20:47:57
New crank sensor fitted and started straight away  :y
Took tyre to have puncture repaired they found a 30/40mm long nail right in the center of the tread he reparied this put it back on the car and it went flat again took it off and checked and it has another hole right next to the repair so needs a new tyre I would mind but the tyres only done a few hundred miles as I havent been using the car  :'(