Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Murph on 15 March 2013, 18:50:29

Title: What's this plug for?
Post by: Murph on 15 March 2013, 18:50:29

I just refitted the loom to my replacement engine and can't seem to find a home for this small plug:
(http://i16.photobucket.com/albums/b9/daymurphy/20130315_151103_zps021a2c87.jpg)

It's at the back of the engine and seems to want to locate close to the CTS and temp sender, both of which are connected.

Any ideas?

Title: Re: What's this plug for?
Post by: Abiton on 15 March 2013, 19:31:35

Purge valve connector I think, associated with carbon cannister.

Title: Re: What's this plug for?
Post by: Murph on 15 March 2013, 19:37:06

That one's already plugged in.
Confusing eh?

Title: Re: What's this plug for?
Post by: Andy B on 15 March 2013, 19:42:33

header tank low fluid level ......  :-\ :-\ :-\

Title: Re: What's this plug for?
Post by: Jimbob on 15 March 2013, 19:50:27

Read the fault codes, may well give you a clue :y

Something should be open circuit.

Title: Re: What's this plug for?
Post by: Murph on 15 March 2013, 20:16:02

May just do that.
Will need to get it in the car first of course.

Title: Re: What's this plug for?
Post by: Kevin Wood on 15 March 2013, 23:43:38

What are the colour codings on the wires to it? ;)

Title: Re: What's this plug for?
Post by: Murph on 17 March 2013, 20:47:15

I got it.
Abiton wins the point - I mistook the part he was talking about.

Thanks all!