Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: djhorner on 18 March 2013, 19:19:37
-
i'm looking for manifolds to put on my 3..0
-
PM sent. :y
-
On this subject, when we change the over, are we gonna have problems with the nuts to the heads???
-
not as far as i'm aware just need to cut 5mm off down pipe there is a link showing how to do it
-
This may help...
http://www.omegaowners.com/forum/index.php?topic=112484.msg1417364#msg1417364 (http://www.omegaowners.com/forum/index.php?topic=112484.msg1417364#msg1417364)
-
Only need to cut the down pipes down by a bit as already stated. Need to use 3.2 manifold gaskets aswell as the 3.0 have holes in them that you wont need. Also will need 2 3.0 downpipe to manifold gaskets on each downpipe for it to seal properly. Did mine last year when I changef head gaskets and all is still ok. No probs with the bolys in the heads not lining up with holes on msnifold. Good luck with it. :y
-
Sorry for the bad typing. This is the lip you need to grind down. :y
(http://i1105.photobucket.com/albums/h355/dantheman1978/2012-08-03144143.jpg)
-
Needs to be ground down so 2 gaskets just sit over the top. Dont need a lot left on it. Hth