Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: amba on 20 March 2013, 16:58:57

Title: Spark plug boot
Post by: amba on 20 March 2013, 16:58:57

Is it possible to remove the boot on a plug lead and replace ?

The rubber "lip" on the plug end of #6 lead has badly split around the bottom and I am thinking this could be the source of a slight miss so wondered if you can just remove and renew that part.

Title: Re: Spark plug boot
Post by: tigers_gonads on 20 March 2013, 17:01:13

I would have thought they was moulded on  :-\

Title: Re: Spark plug boot
Post by: amba on 20 March 2013, 17:03:16

That was my thought but unsure if they were replaceable...or maybe its a new #6 lead then

Title: Re: Spark plug boot
Post by: dbug on 20 March 2013, 17:12:59

Quote from: amba on 20 March 2013, 17:03:16

That was my thought but unsure if they were replaceable...or maybe its a new #6 lead then

:y

Title: Re: Spark plug boot
Post by: amba on 20 March 2013, 17:16:24

On the case  then   :y

Just curious as to how much damage the end of the rubber boot must have before it causes a miss as been chasing this around for ages and think this must be the cause. >:(