Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: paintshoptec on 19 May 2013, 12:37:55
-
hi all
got a problem with my ar25 on my 2.6 2002 omega tried all the obvious things.
i can get hold ar35 as a replacement instead of a ar25 which as only done 66k miles could anyone tell me
if its just a straight swap or will it it need to go on a tech 2
thanks
-
dunno about the mig, but was a straight swap on my 3.0 Carlton
-
Straight swap :y
-
Straight swap. Use your existing 2.6 TCM :)
-
i take it that tcm is the torque converter
-
i take it that tcm is the torque converter
:y :y
-
i take it that tcm is the torque converter
:y :y
???,wouldnt that be Transmission Control Module ::) ;)
-
i take it that tcm is the torque converter
No, Transmission Control Module, which is the gearbox ECU near the bonnet lever.
-
so ar35 gearbox with torque converter from my 2.6 and thats it
-
so ar35 gearbox with torque converter from my 2.6 and thats it
If the Torque converter is with the Ar35 that you have then I would be tempted to use it,if your ar25 box is breaking up internally then filings/swarth could already be in the torque converter so fitting it to the new box may cause problems :y
-
i take it that tcm is the torque converter
:y :y
Stand corrected :-[
-
ar35 now in the car runs like a dream thanks for your help guys
neil
-
ar35 now in the car runs like a dream thanks for your help guys
neil
how about the gearbox ratios ?
-
its all running ok no issues