Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Webby the Bear on 20 May 2013, 17:01:45
-
Hi guys,
As above.... is the airbox just held in by rubber gromets and after disconnecting from the bagpipe that houses the MAF... i'm assuming I can just pry up on it?
Cheers guys :y
-
Correct. :y
-
cheers albus :y :y :y :y
-
Yup - 3 grommets, 2 to wing, one at bottom not far from rad.
-
careful of hook part under metal pipe to bottom radiator hose :y
-
cheers for the help guys. box came out without too much fuss but I STILL don't have enough room to swing a 24mm wrench on to the bottom EGR pipe bolt. adjustable wrench head is too thick to sneak between the pipes ::) ill have to get a short 24mm from somewhere.
ps, that lower snorkel from the air box... is that the tube that sticks up an lives just above the washer fluid tank... looks like a trumpet? lol presuming that's where the air comes in :)
-
cheers for the help guys. box came out without too much fuss but I STILL don't have enough room to swing a 24mm wrench on to the bottom EGR pipe bolt. adjustable wrench head is too thick to sneak between the pipes ::) ill have to get a short 24mm from somewhere.
ps, that lower snorkel from the air box... is that the tube that sticks up an lives just above the washer fluid tank... looks like a trumpet? lol presuming that's where the air comes in :)
Aye :y