Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Jan Suhr on 24 June 2013, 16:37:51
-
Were out driving today and parked and locked the car to the deadlock mode.
My remote is not working so I locked with the key. When I came back and put in the key to open, nothing happened, it was stuck in dead lock. Pulling the key out and in again a few times and finally it unlocked.
When turning it to unlock I felt that something wasn't right, there was a resistance in the mechanism. I have a feeling that I could turn the key more than normal.
I will leave it in just normal lock next time so I can get in through the rear hatch if needed.
What could be the problem? the linkage or the motor?
Thanks
Jan
-
Thinking just the switches, as the unlock is normally powered -by turning key, you are simply closing a switch to activate the motors.
-
Thinking just the switches, as the unlock is normally powered -by turning key, you are simply closing a switch to activate the motors.
Could be the motor, though. I had one where the switch in the motor went dodgy so it would deadlock when locking normally, but then wouldn't move from the deadlocked position. I changed it pretty quick!
-
Thinking just the switches, as the unlock is normally powered -by turning key, you are simply closing a switch to activate the motors.
Could be the motor, though. I had one where the switch in the motor went dodgy so it would deadlock when locking normally, but then wouldn't move from the deadlocked position. I changed it pretty quick!
Actually, I was thinking of the switches in the motor, as they are usually the first to fail.
-
Thinking just the switches, as the unlock is normally powered -by turning key, you are simply closing a switch to activate the motors.
Could be the motor, though. I had one where the switch in the motor went dodgy so it would deadlock when locking normally, but then wouldn't move from the deadlocked position. I changed it pretty quick!
Actually, I was thinking of the switches in the motor, as they are usually the first to fail.
:y
-
Ok, I'll try to find a motor on the scrapyard to replace mine with.
Thanks
Jan
-
They are cheap and easy to fix. :y
http://www.omegaowners.com/forum/index.php?topic=90642.0 (http://www.omegaowners.com/forum/index.php?topic=90642.0)
-
I did send my old 2001 to the scrapyard a few weeks ago, I'll go there and see if I can get the motor from that one.
Otherwise they seem hard to find on used markets...
Jan
-
Once your in the drivers seat can you get out of the drivers door ok
-
When pulling the lever to open the door there is a bit of resistance the last part of the movement. It might have something to do with it too?
Jan