Omega Owners Forum

Chat Area => General Car Chat => Topic started by: bored bigyin54 on 29 June 2013, 19:40:22

Title: shoot
Post by: bored bigyin54 on 29 June 2013, 19:40:22
i think i will shoot my 2.2 .its getting a pain now. just took it for a short run and it behaved like a slug going uphill but then picked up again :y :y
Title: Re: shoot
Post by: tunnie on 29 June 2013, 19:48:30
checked plugs for oil?  ::)

Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 19:54:47
checked plugs for oil?  ::)
done that wenn i changed cam gasket .dry as a bone :y 
Title: Re: shoot
Post by: omega3000 on 29 June 2013, 19:59:27
See what happens when you put a genuine part on  :P ;D
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 20:02:37
See what happens when you put a genuine part on  :P ;D
;D ;D ;D not used to clean breathers thats what  ;D ;D
Title: Re: shoot
Post by: Steve B on 29 June 2013, 20:05:41
did you use torque wrench (8nm)
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 20:08:05
yes done that have to go out in mornin and check plugs again :y :y got to do it in the next week .towing the van in two weeks cant have it like that  :y :y
Title: Re: shoot
Post by: omega3000 on 29 June 2013, 20:11:37
Maybe plug lead not on tight enough or you knocked it  :-\
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 20:14:18
Maybe plug lead not on tight enough or you knocked it  :-\
no plug lead  :y :y
Title: Re: shoot
Post by: Steve B on 29 June 2013, 20:18:50
Did you do the job as per guide on here
Title: Re: shoot
Post by: omega3000 on 29 June 2013, 20:20:22
Maybe plug lead not on tight enough or you knocked it  :-\
no plug lead  :y :y

Take it for italian tune up , probably just s#it in it  :-\
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 20:22:01
Did you do the job as per guide on here
yes .what i will do in the morning is check the plug  well again may be gasket moved  ??? ???
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 20:25:12
i think its time to get a car i dont have to work on :y :y
Title: Re: shoot
Post by: symes on 29 June 2013, 20:59:02
maybe a bit of crud got pulled through fuel line-noticed that if i go to tesco's :-\
Title: Re: shoot
Post by: tunnie on 29 June 2013, 21:02:35
maybe a bit of crud got pulled through fuel line-noticed that if i go to tesco's :-\

Don't subscribe to those kind of theorys tbh, modern fuels are perfectly clean.

Dropped the tank on a 140k 2.5TD, perfectly clean inside, no grit no dirt, no nothing  :y
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 21:09:04
found the problem . leaking oil . takeing  it back off in the morning and redo it again  >:( >:( >:(
Title: Re: shoot
Post by: Steve B on 29 June 2013, 21:15:16
found the problem . leaking oil . takeing  it back off in the morning and redo it again  >:( >:( >:(
where
Title: Re: shoot
Post by: bored bigyin54 on 29 June 2013, 21:18:00
found the problem . leaking oil . takeing  it back off in the morning and redo it again  >:( >:( >:(
where
by the plugs  took the plastic cover off and found some oil  :y :y look at it in the morning to dark to do more now :y :y
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 11:26:54
3 out off 4 plugs covered in oil all clean now.got to get my mate back with his wrench now :y :y
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 11:54:24
did you use torque wrench (8nm)
what is that in old money we got an older wrench :y :y
Title: Re: shoot
Post by: chrisgixer on 30 June 2013, 11:56:52
did you use torque wrench (8nm)
what is that in old money we got an older wrench :y :y
So NO then. (Oh sigh....)
Title: Re: shoot
Post by: Broomies Mate on 30 June 2013, 11:58:57
5.9 lbf*ft (pound-force foot)
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 12:11:05
5.9 lbf*ft (pound-force foot)
thank you he's only got the old wrench  :y :y
Title: Re: shoot
Post by: Seth on 30 June 2013, 12:44:18
i think its time to get a car i dont have to work on :y :y

What've we told ya 'bout fitting dodgy parts?(https://dl.dropboxusercontent.com/u/43954633/bangshead.gif)

You need to let the train take the strain Wilf! 8)
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 12:45:45
i think its time to get a car i dont have to work on :y :y

What've we told ya 'bout fitting dodgy parts?(https://dl.dropboxusercontent.com/u/43954633/bangshead.gif)

You need to let the train take the strain Wilf! 8)
that's a no to the train  ;D ;D ;D
Title: Re: shoot
Post by: omega3000 on 30 June 2013, 13:15:28
Just think how much easier it would have been replacing the plugs on V6  ::) ;D
Title: Re: shoot
Post by: martin42 on 30 June 2013, 13:21:16
Should have used pattern parts  ;D ;D :D
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 13:36:18
Should have used pattern parts  ;D ;D :D
yes martin didn't have that bother when i done the 2.0 with pattern parts  ;D ;D ;D
Title: Re: shoot
Post by: RobG on 30 June 2013, 18:32:20
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 19:43:35
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
me and him done it rob . i have changed dozens off cam gaskets with no problem . that car just wants to wind me up  ;D ;D ;D
Title: Re: shoot
Post by: RobG on 30 June 2013, 19:46:13
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
me and him done it rob . i have changed dozens off cam gaskets with no problem . that car just wants to wind me up   ;D ;D ;D
Don`t take much for that Ralf :D ;D :y
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 19:52:50
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
me and him done it rob . i have changed dozens off cam gaskets with no problem . that car just wants to wind me up   ;D ;D ;D
Don`t take much for that Ralf :D ;D :y
tell me about it . its because i am taking the van out in two week's something allways goes wrong ;D ;D ;D
Title: Re: shoot
Post by: omega3000 on 30 June 2013, 20:58:51
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
me and him done it rob . i have changed dozens off cam gaskets with no problem . that car just wants to wind me up ;D ;D ;D

Aye i know the feeling  >:( Still least its not a peugeot  ::)
Title: Re: shoot
Post by: tunnie on 30 June 2013, 21:01:03
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
me and him done it rob . i have changed dozens off cam gaskets with no problem . that car just wants to wind me up ;D ;D ;D

Aye i know the feeling  >:( Still least its not a peugeot  ::)

Yeah, no one is that stupid are they  ::)  :-X  ;D ;D
Title: Re: shoot
Post by: omega3000 on 30 June 2013, 21:12:34
You sure your mate is a genuine mechanic and not a pattern one Ralf :D :D ;D
me and him done it rob . i have changed dozens off cam gaskets with no problem . that car just wants to wind me up ;D ;D ;D

Aye i know the feeling  >:( Still least its not a peugeot  ::)

Yeah, no one is that stupid are they  ::)  :-X  ;D ;D

Nope not again  ::) :-[ :-[ ;D
Title: Re: shoot
Post by: Seth on 30 June 2013, 21:35:42
that's a no to the train  ;D ;D ;D

Why not Rolf? :o

Crikey ... friendly on-board staff ... and not to mention over 20 million quid's worth of infrastructure improvements.
You're soon gonna get a half-hourly service ... all good stuff buddy! :y
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 21:50:33
that's a no to the train  ;D ;D ;D

Why not Rolf? :o

Crikey ... friendly on-board staff ... and not to mention over 20 million quid's worth of infrastructure improvements.
You're soon gonna get a half-hourly service ... all good stuff buddy! :y
still got to use the car seth ;D ;D
Title: Re: shoot
Post by: Seth on 30 June 2013, 21:53:33
Reckon a bloke in Bargoed'll take that car off you Alf ...  ::)
Title: Re: shoot
Post by: tunnie on 30 June 2013, 21:54:28
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)
Title: Re: shoot
Post by: Seth on 30 June 2013, 22:20:45
Sorry tunnie, we need to agree to disagree on this one ...

Got what're probably the best value train fares in the UK down here.
Big Yen could enjoy a return trip to our Capital for a tad over 7 quid ... that's a round trip of nearly 50 miles ... and it's totally unrestricted in terms of choice of travelling times.

That same fare drops to a measly fiver during the evening! ;)
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 22:29:41
Sorry tunnie, we need to agree to disagree on this one ...

Got what're probably the best value train fares in the UK down here.
Big Yen could enjoy a return trip to our Capital for a tad over 7 quid ... that's a round trip of nearly 50 miles ... and it's totally unrestricted in terms of choice of travelling times.

That same fare drops to a measly fiver during the evening! ;)
and then got to walk 2.5 miles back home with a disabled wife . that dont work . and the train wont tow my caravan  ??? ???
Title: Re: shoot
Post by: bored bigyin54 on 30 June 2013, 22:31:23
Reckon a bloke in Bargoed'll take that car off you Alf ...  ::)
why its working now seth  ??? ???
Title: Re: shoot
Post by: Vamps on 30 June 2013, 23:01:53
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)

I bet the truck drivers love you on the A1................. ::) ::) :-X
Title: Re: shoot
Post by: tunnie on 30 June 2013, 23:04:08
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)

I bet the truck drivers love you on the A1................. ::) ::) :-X

Eh?   ??? ???

Since when could trucks do 80mph  :o
Title: Re: shoot
Post by: Vamps on 30 June 2013, 23:09:06
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)

I bet the truck drivers love you on the A1................. ::) ::) :-X

Eh?   ??? ???

Since when could trucks do 80mph  :o

Then why does it take you so long? blimey I have driven to meetings in South London and back in a day in a Cortina, I also lived in Hertford for 7 years; I am about half hour north of Darlington, Hertford to here in 3 - 3.5 hours in a Talbot Matra Rancho, quicker in other cars, assuming the roads are fine, and they have all been upgraded since those day.  Use the A1 not the M1........ :y  :y
Title: Re: shoot
Post by: 05omegav6 on 30 June 2013, 23:10:45
More to the point, since when did Tunnie travel at 80 ::)
Title: Re: shoot
Post by: tunnie on 30 June 2013, 23:13:31
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)

I bet the truck drivers love you on the A1................. ::) ::) :-X

Eh?   ??? ???

Since when could trucks do 80mph  :o

Then why does it take you so long? blimey I have driven to meetings in South London and back in a day in a Cortina, I also lived in Hertford for 7 years; I am about half hour north of Darlington, Hertford to here in 3 - 3.5 hours in a Talbot Matra Rancho, quicker in other cars, assuming the roads are fine, and they have all been upgraded since those day.  Use the A1 not the M1........ :y  :y

Try driving in London in a Friday night rush hour  ::)
Title: Re: shoot
Post by: tunnie on 30 June 2013, 23:14:32
More to the point, since when did Tunnie travel at 80 ::)

Some rumors are not true ;)

like many others reputations on this place, often wrong  ;)
Title: Re: shoot
Post by: tunnie on 30 June 2013, 23:16:27
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)

I bet the truck drivers love you on the A1................. ::) ::) :-X

Eh?   ??? ???

Since when could trucks do 80mph  :o

Then why does it take you so long? blimey I have driven to meetings in South London and back in a day in a Cortina, I also lived in Hertford for 7 years; I am about half hour north of Darlington, Hertford to here in 3 - 3.5 hours in a Talbot Matra Rancho, quicker in other cars, assuming the roads are fine, and they have all been upgraded since those day.  Use the A1 not the M1........ :y  :y

Try driving in London in a Friday night rush hour  ::)

Also, when did I say I was going straight there  ???
Title: Re: shoot
Post by: Vamps on 30 June 2013, 23:16:50
For once I agree with Bigyin  :o

Looking to see a mate in Darlington towards end of the year, looked at the train as its a good 4.5 hour drive up there. They wanted £120 for a return ticket  :o :o  :o

Splitting fuel with a mate, it would be about £30 each if we took the 2.2  :)

I bet the truck drivers love you on the A1................. ::) ::) :-X

Eh?   ??? ???

Since when could trucks do 80mph  :o

Then why does it take you so long? blimey I have driven to meetings in South London and back in a day in a Cortina, I also lived in Hertford for 7 years; I am about half hour north of Darlington, Hertford to here in 3 - 3.5 hours in a Talbot Matra Rancho, quicker in other cars, assuming the roads are fine, and they have all been upgraded since those day.  Use the A1 not the M1........ :y  :y

Try driving in London in a Friday night rush hour  ::)

Done that, but fair play, did not consider that...... :y :y
Title: Re: shoot
Post by: Steve B on 30 June 2013, 23:17:24
So i take it you have sorted it now ralf  :y

What went wrong on the first attempt  :-\
Title: Re: shoot
Post by: tunnie on 30 June 2013, 23:18:22
So i take it you have sorted it now ralf  :y

What went wrong on the first attempt  :-\

Either done up too tight, or not fitted correctly i'd say  :)
Title: Re: shoot
Post by: bored bigyin54 on 01 July 2013, 10:10:00
So i take it you have sorted it now ralf  :y

What went wrong on the first attempt  :-\

Either done up too tight, or not fitted correctly i'd say  :)
not tight at all he thought he did .i had gone to make a coffee . did ask him if they tight . he said yes >:( >:(
Title: Re: shoot
Post by: omega3000 on 01 July 2013, 12:14:15
All sorted then now ralf  :-\
Title: Re: shoot
Post by: bored bigyin54 on 01 July 2013, 13:55:52
All sorted then now ralf  :-\
well i hope so if not will go and get a pattern gasket  ;D ;D ;D
Title: Re: shoot
Post by: omega3000 on 01 July 2013, 14:46:05
All sorted then now ralf  :-\
well i hope so if not will go and get a pattern gasket  ;D ;D ;D

 ;D ;D :y
Title: Re: shoot
Post by: chrisgixer on 01 July 2013, 17:41:06
So i take it you have sorted it now ralf  :y

What went wrong on the first attempt  :-\

Either done up too tight, or not fitted correctly i'd say  :)
not tight at all he thought he did .i had gone to make a coffee . did ask him if they tight . he said yes >:( >:(
told you that two pages ago Cliff! Come on keep up. ;D ;D