Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Big_Al on 06 September 2013, 07:41:30

Title: memory seats to a MV6
Post by: Big_Al on 06 September 2013, 07:41:30

I am thinking of changing seats to Elite leather &  just looked at the guide on fitting elite seats to other models.

If the minor wiring adaption is carried out as shown will this allow  the memory system work ? :-\ :-\

or is Tech 2 required to programme ? :-\

TIA    Al :y

Title: Re: memory seats to a MV6
Post by: albitz on 06 September 2013, 12:59:15

Quote from: Essex Big Al on 06 September 2013, 07:41:30

I am thinking of changing seats to Elite leather &  just looked at the guide on fitting elite seats to other models.

If the minor wiring adaption is carried out as shown will this allow  the memory system work ? :-\ :-\

or is Tech 2 required to programme ? :-\

TIA    Al :y

Yes.

No.   :y

Title: Re: memory seats to a MV6
Post by: albitz on 07 September 2013, 09:42:26

Im assuming though that the wiring & plugs to MV6 seats will be the same setup as a basic (CD) spec Omega. Perhaps someone could confirm ?

Title: Re: memory seats to a MV6
Post by: zirk on 07 September 2013, 11:10:48

Have Had FL 2000 MV6 leather in a FL 2000 CD before no issues.  :y

Title: Re: memory seats to a MV6
Post by: albitz on 07 September 2013, 11:15:25

Electrical connectors a straight swap Chris ?

Title: Re: memory seats to a MV6
Post by: zirk on 07 September 2013, 11:25:07

Quote from: Albitz on 07 September 2013, 11:15:25

Electrical connectors a straight swap Chris ?

From memory yes Albs, a few years back now, its was a Car I got from CraigA (Watford Member, another 'Garage said HG Fail' when it wasn't), He had MV6 Leather fitted to his 2.0 LPG CD, I put some CD Seats back in before I shifted the car, fairly sure it was a straight swop.

Title: Re: memory seats to a MV6
Post by: albitz on 07 September 2013, 11:34:49

Cheers. :y

Title: Re: memory seats to a MV6
Post by: Big_Al on 07 September 2013, 20:18:32

Quote from: zirk on 07 September 2013, 11:10:48

Have Had FL 2000 MV6 leather in a FL 2000 CD before no issues.  :y

This is gonna be FL  Elite leather seats to   FL  MV6 though  :-\ :-\  any probs gonna occur ? :-\ :-\

Title: Re: memory seats to a MV6
Post by: zirk on 07 September 2013, 21:26:02

I did wonder about that when I read the post title, where did the CD bit come from then?, or am I guessing Albs has done the Elite to CD swop in the past and wanted to confirm that MV6 would be the same deal? Should be ok though, longer seat bolts on the Elite so grab them, plus all the rear wiring and stuff if you want the rears to heat up.  :y

Title: Re: memory seats to a MV6
Post by: Big_Al on 07 September 2013, 21:42:38

Quote from: zirk on 07 September 2013, 21:26:02

I did wonder about that when I read the post title, where did the CD bit come from then?, or am I guessing Albs has done the Elite to CD swop in the past and wanted to confirm that MV6 would be the same deal? Should be ok though, longer seat bolts on the Elite so grab them, plus all the rear wiring and stuff if you want the rears to heat up.  :y

Albs . . .  you reading this  ;D ;D ;D

Title: Re: memory seats to a MV6
Post by: albitz on 07 September 2013, 21:56:12

Yes mate.Bolts,switches,relays looms etc. all included. :y