Omega Owners Forum
Chat Area => General Car Chat => Topic started by: omega3000 on 01 October 2013, 19:49:55
-
Hiding a very special cutting tool :)
(http://i219.photobucket.com/albums/cc41/milleblack/2013-09-22110322_zpse7cf4826.jpg)
-
Our resident suspension expert too :)
-
Our resident suspension expert too :)
All round expert I think you mean...
-
Our resident suspension expert too :)
All round expert I think you mean...
I reckon so
-
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
-
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
Nothing specifically. Well, at the moment, anyway
-
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
Nothing specifically. Well, at the moment, anyway
I need help from anyone who is willing :-X ::)
The list is growing, although I'm hoping to tick off a big chunk of jobs in the next few weeks :y
-
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
Nothing specifically. Well, at the moment, anyway
I need help from anyone who is willing :-X ::)
The list is growing, although I'm hoping to tick off a big chunk of jobs in the next few weeks :y
Always willing, but can't provide location or tools.
-
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
Nothing specifically. Well, at the moment, anyway
I need help from anyone who is willing :-X ::)
The list is growing, although I'm hoping to tick off a big chunk of jobs in the next few weeks :y
Time is tight for me at the moment, but anything I can help with?
-
Towards end of the month works if you can do weekdays :y
-
Hiding a very special cutting tool :)
(http://i219.photobucket.com/albums/cc41/milleblack/2013-09-22110322_zpse7cf4826.jpg)
And here's what he did. Might of been on the piss the night before though, by the looks. :o ;D
(http://i344.photobucket.com/albums/p326/chrisgixer/B3E2893A-E825-42C4-BC5A-F70F0283F808-2788-000000C5C47F8965_zpsf79818c8.jpg)
-
.....
And here's what he did. Might of been on the piss the night before though, by the looks. :o ;D
(http://i344.photobucket.com/albums/p326/chrisgixer/B3E2893A-E825-42C4-BC5A-F70F0283F808-2788-000000C5C47F8965_zpsf79818c8.jpg)
It's very nearly round ............ ::) ::) ::)
Surely a circular jig has been made by now ...... ::) ::)
-
And this is where the old one position was, and that's where the new one is. :)
(http://i344.photobucket.com/albums/p326/chrisgixer/FCB2BCB5-87BB-4987-928F-6D46BEDFCEC3-2788-000000C93CEE6A37_zpsea60f16e.jpg)
-
Bah, its really not necessary to be that accurate with the plasma.
It's not welding the boss cap on that's the hard bit ;D
-
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
Nothing specifically. Well, at the moment, anyway
I need help from anyone who is willing :-X ::)
The list is growing, although I'm hoping to tick off a big chunk of jobs in the next few weeks :y
Always willing, but can't provide location or tools.
I don't think you're really up to it or need anything else going on at the moment! But thank you :y
Our resident suspension expert too :)
All round expert I think you mean...
What do you need off him then ::) :D
Nothing specifically. Well, at the moment, anyway
I need help from anyone who is willing :-X ::)
The list is growing, although I'm hoping to tick off a big chunk of jobs in the next few weeks :y
Time is tight for me at the moment, but anything I can help with?
Yes you could but really not that urgent at the moment... Thanks :y
Towards end of the month works if you can do weekdays :y
Weekdays are no issue Al but, as above, mostly not too bad.
Hopefully our resident suspension expert and I will be meeting up in the next few weeks to tick off all the suspension work plus a bit more. Then it's just cambelt (7k time), stat (although it's been behaving itself lately), cam cover gaskets and AC condenser to go. Plus a handbrake service (probably do that whilst doing the suspension), geometry, tyres and a damn good clean!
The other one is a little better.... Need to pull the dash out and replace the blown/removed EML (don't you love pre-cat codes!), find why the radio has no reception, see if I can get the cdc3 working and get the drivers heated seat fixed!
They both need to be gone over thoroughly with underseal and mine will very soon need a new exhaust! It's never ending... Why did I buy another one? :-X ::) :D
-
At least I've nearly finished decorating the nursery so that's one thing ticked off :y
-
And this is where the old one position was, and that's where the new one is. :)
(http://i344.photobucket.com/albums/p326/chrisgixer/FCB2BCB5-87BB-4987-928F-6D46BEDFCEC3-2788-000000C93CEE6A37_zpsea60f16e.jpg)
Is Mark wearing his 1970s glam rock boots again or is the bloke in the background sitting down ::)
-
He's very short.
And the Mad mechanic is shorter still. ;) ;D
-
I do have a jig for the hole cutting but on the car its pretty challenging to use so I found hacking a smaller hole and then neatening the edges up worked better, you might just be able to make out the black marking on the steel for the hole required.
The boss welding issue should now be addressed as I replaced the shade in the welding mask at the weekend so can see again properly.
-
Is Mark wearing his 1970s glam rock boots again or is the bloke in the background sitting down ::)
I thought we had agreed not to talk about Mark's shoe collection, after we caught him that time wearing......oops! ::)
-
I do have a jig for the hole cutting but on the car its pretty challenging to use so I found hacking a smaller hole and then neatening the edges up worked better, you might just be able to make out the black marking on the steel for the hole required.
The boss welding issue should now be addressed as I replaced the shade in the welding mask at the weekend so can see again properly.
;D it was a brilliant job Mark, and don't let anyone tell you different, Thankyou. :y
Actually that reminds me... (Runs off to the welding thread)
-
Yeh, post a pic of the bosses on your spare cats ;D
-
And this is where the old one position was, and that's where the new one is. :)
(http://i344.photobucket.com/albums/p326/chrisgixer/FCB2BCB5-87BB-4987-928F-6D46BEDFCEC3-2788-000000C93CEE6A37_zpsea60f16e.jpg)
Is Mark wearing his 1970s glam rock boots again or is the bloke in the background sitting down ::)
Thats martin ;D Dont think he likes glam rock :D
-
Our resident suspension expert too :)
All round expert I think you mean...
He's very round ;D ;D
-
Yeh, post a pic of the bosses on your spare cats ;D
Your not funny Mark. :(
;D
-
Yeh, post a pic of the bosses on your spare cats ;D
(http://www.freesmileys.org/smileys/smiley-basic/popcorn.gif)