Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Cliffo B on 11 October 2013, 14:49:06

Title: NCDC 2013 keeps changing from English to German
Post by: Cliffo B on 11 October 2013, 14:49:06

Hello all,can anyone help?
the display on Migsy's NCDC 2013 (with black/orange display)
keeps changing to German
it's done it about 6 times in the last couple of weeks
is there a way to program it back to English permanently?
anyone know what can be causing this problem?
Thanks all in advance
,

Title: Re: NCDC 2013 keeps changing from English to German
Post by: TheBoy on 11 October 2013, 15:19:49

Its a tech2 to set it back semi permenently - most I see are set to German, and the settings available on BC functions should keep it that way until battery disconnection.

I may be the screen and/or NCDC are having EPROM amnesia.  If you ever pass Nottingham way, ask that DTM fella to reprogram both the screen and the NCDC to see if that helps.

Title: Re: NCDC 2013 keeps changing from English to German
Post by: Cliffo B on 11 October 2013, 15:52:21

Ah thanks TB :y
so low voltage can be the problem
That adds up
I think Migsy is presently running with a faulty alternator
presumeably it's the regulator thats maintaining a battery voltage of appx 10.50V
going in the next hour or so to have it tested/checked
Once more thanks  :y :y