Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: P6UL K on 16 October 2013, 12:08:23
-
Are they the same across the V6 range?
A friend has a 3.0 and is looking to get a second pair to gas flow, port & get sportier cams in while still being able to use his car then swap over once the works have been done.
As a stab in the dark I'm assuming 2.5/3.0 are the same?
-
The combustion chambers will be different sizes between 3.0 and 2.5.
A 2.5 head will raise compression, which might be beneficial if tuning, but I believe we worked it out once, and it was north of 12.5:1, which is a little too much, so I'd stick with a 3.0 head.
I believe the 3.2 head is similar, with a dish in the piston having been used to raise the combustion chamber volume, so that might be a possibility too.
-
Ok thanks Kevin, I just needed to clarify before I put a wanted thread up.
:y