Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy663 on 27 October 2013, 21:06:57

Title: Drip Tray removal
Post by: Andy663 on 27 October 2013, 21:06:57

How dos the drip tray, under the engine, come out. Is it just a series of bolts?

Title: Re: Drip Tray removal
Post by: symes on 27 October 2013, 21:09:33

yes 10mm spanner/socket---they are self tap bolts :y

Title: Re: Drip Tray removal
Post by: 05omegav6 on 27 October 2013, 22:00:21

6 iirc, 3 each side :y

Title: Re: Drip Tray removal
Post by: dbug on 27 October 2013, 23:31:44

2 front & 2 rear = 4 ;)

(http://i1225.photobucket.com/albums/ee386/dbugit/undertray_zpsf849ad6c.jpg)

HTH :y

Title: Re: Drip Tray removal
Post by: Andy663 on 29 October 2013, 07:50:23

Thanks, 2 x 7mm self tapping screws front and rear.

Forgive my ignorance but what does IIRC stand for?

Title: Re: Drip Tray removal
Post by: Andy H on 29 October 2013, 08:43:41

If I Recall Correctly :y

Title: Re: Drip Tray removal
Post by: robson on 29 October 2013, 19:13:11

See guide Common Acronyms