Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: chrisgixer on 10 November 2013, 23:26:00
-
Which pins do I need to apply 12 volts to, to get the seat height motor to activate?
I want to to raise and lower the seat when its out of the car to check the mechanism.
-
Positive to the thick red wire on the grey plug, negative to the thick brown wire on thr grey plug. Actual wire colours on the seat will either be red and brown or red and black but red is positive :y
That's the plug at the side of the seat where the car loom connects btw :y
Don't worry about the airbags etc as they're powered separately :y
Just don't apply anything vaguely resembling electrickery to the two smaller plugs either side of the main one ::)
-
Look at the guide I knocked up, that will provide power to all seat motors, but not heaters or SRS stuff