Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: amba on 15 November 2013, 22:10:36

Title: WTD for F/L
Post by: amba on 15 November 2013, 22:10:36

The end is in sight now  ;D and I just need a couple of bits to complete the "jigsaw"

Pair of decent/strong bonnet support rams for F/L
Ignition barrel rubber 0/1/2 position rubber cover plate
Front glove box courtesy light

Thanks guys :y and pm with details

Title: Re: WTD for F/L
Post by: albitz on 15 November 2013, 23:53:56

Got bonnet struts. Can check on other bits.

Title: Re: WTD for F/L
Post by: omegod on 16 November 2013, 00:22:42

Got the other bits but no struts

Title: Re: WTD for F/L
Post by: zirk on 16 November 2013, 01:36:44

got 1 and 2 might have the 3rd if fitted to a iPlod.

Title: Re: WTD for F/L
Post by: 05omegav6 on 16 November 2013, 04:00:25

Quote from: zirk on 16 November 2013, 01:36:44

got 1 and 2 might have the 3rd if fitted to a iPlod.

Should be :y

Title: Re: WTD for F/L
Post by: amba on 16 November 2013, 16:13:58

Thanks guys  :y

As Zirk is kindly doing a bit of electrickery 8) for me would make postage easier from just 1 source so if all 3 bits are available off the "plod" then please take as sorted now :y

Title: Re: WTD for F/L
Post by: zirk on 16 November 2013, 16:34:33

OK, just to confirm the rubber bit your after is the large rubber washer that fills the gap betwwen the  Ing. Barrel and the two plastic outer housings.

Will get the bits off Monday as Car is up the road to me.  ;) 

Title: Re: WTD for F/L
Post by: zirk on 16 November 2013, 16:43:51

Quote from: ex taxi al on 16 November 2013, 04:00:25

Quote from: zirk on 16 November 2013, 01:36:44

got 1 and 2 might have the 3rd if fitted to a iPlod.

Should be :y

Guessing it should be there as well Al, but you never know with Plods, guessing they would need to shed some light on how many Mars Bars and Ciggy Packs are left in the Glove Box though.  ::)

Title: Re: WTD for F/L
Post by: amba on 16 November 2013, 19:02:49

Cheers Zirk...yes the rubber washer type thing that fits over ignition barrel and fills the void between that and the column trim..seem to remember it had 0/1/2 stamp printed on it.

Cant see why "plod" wouldnt have glove box light as you are right about mars bars etc.

Drop me a pm /text etc when removed with price  inc postage  :y also for the other electricky bit too  :y :y

Title: Re: WTD for F/L
Post by: zirk on 18 November 2013, 19:21:59

Ok Andy, all three bits now in my hands, will call later.  ;)