Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Toledodude1973 on 17 November 2013, 19:00:34

Title: breather tubes
Post by: Toledodude1973 on 17 November 2013, 19:00:34
Can some knowledgeable soul please explain to me where the 4 tubes from the back of the plenum actually go , the ones from the plastic cover, thank you
Title: Re: breather tubes
Post by: jonny2112 on 17 November 2013, 20:01:52
The two larger tubes actually join together and, along with the smallest tube, go to the 'breather box'.
I'll have to think about the other one though .....  :-[
Title: Re: breather tubes
Post by: RobG on 17 November 2013, 20:10:24
Looking from front of engine

Pre throttle breather     Post throttle breather   Carbon canister vent (purge valve)   Pre throttle breather
Title: Re: breather tubes
Post by: 05omegav6 on 17 November 2013, 20:21:12
Wot 'e sed :y
Title: Re: breather tubes
Post by: Toledodude1973 on 18 November 2013, 19:27:15
So basically all tubes would need tracing and cleaning out including breather box entry to do a thorough job?
Title: Re: breather tubes
Post by: jonny2112 on 18 November 2013, 19:33:35
So basically all tubes would need tracing and cleaning out including breather box entry to do a thorough job?

Yep, absolutely. There's a great guide in the maintenance section  :y
Title: Re: breather tubes
Post by: Toledodude1973 on 18 November 2013, 20:00:48
Thanks Jonny and its not too difficult?
Title: Re: breather tubes
Post by: jonny2112 on 18 November 2013, 20:06:08
Access to the breather box itself is awkward, as is removing the clips!
It's a cinch when you get that far  ;D
Title: Re: breather tubes
Post by: jonny2112 on 18 November 2013, 20:08:52
I think this is the link  :y
http://www.omegaowners.com/forum/index.php?topic=90653.0
Title: Re: breather tubes
Post by: Toledodude1973 on 18 November 2013, 20:27:34
Thanks mate having a look at guide now
Title: Re: breather tubes
Post by: Toledodude1973 on 18 November 2013, 20:48:52
Quoted from guide:
(Remove the 2 breather tubes - 1 small one from the breather box, 1 large one that divides into two from the same breather box.}

Where does the fourth tube from the breather bridge go to? thanks for help
Title: Re: breather tubes
Post by: RobG on 18 November 2013, 20:54:42
Purge valve
Title: Re: breather tubes
Post by: Toledodude1973 on 18 November 2013, 20:56:55
So just clean that pipe like the others then Rob
Title: Re: breather tubes
Post by: jonny2112 on 18 November 2013, 21:01:53
Tbh I'm not sure I've ever totally disconnected that last pipe!
I must have a look into that for next time  :-X  No pun intended  :D
Title: Re: breather tubes
Post by: Toledodude1973 on 18 November 2013, 21:03:43
You've all been a great help as usual thanks
Title: Re: breather tubes
Post by: RobG on 18 November 2013, 21:08:51
So just clean that pipe like the others then Rob
:y
Valve is mounted on the back of the 1-3-5 head
Title: Re: breather tubes
Post by: 05omegav6 on 18 November 2013, 21:10:53
So just clean that pipe like the others then Rob

Best remove the pipe to clean it :y DAMHIK, but the purge valve is allergic to carb cleaner ::)
Title: Re: breather tubes
Post by: jonny2112 on 18 November 2013, 21:11:15
So just clean that pipe like the others then Rob
:y
Valve is mounted on the back of the 1-3-5 head

Of course it is! D'oh  :-[
Title: Re: breather tubes
Post by: omega3000 on 18 November 2013, 21:43:16
 :y

(http://images.omegaowners.com/images/guides/BreatherBodyV6/VaderPictures014.jpg)
Title: Re: breather tubes
Post by: 05omegav6 on 18 November 2013, 21:50:33
The red arrows point to the breather box pipes ::)

Purge valve is the thing just to the right with the plug and two hoses... one to the carbon canister/vapour tank in the right hand wheel arch, tother to the breather bridge :y