Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: danzigfan on 28 November 2013, 08:51:09

Title: Radiator question
Post by: danzigfan on 28 November 2013, 08:51:09

Hi guys, I just got a good used radiator of a omega donor...It was 2.0 miggy, but it seems it's a bit different from my miggy's radiator. I added a pic so you'll see it.
I need to know, should I cover those two empty threads on plastic side on the left or is it ment to be used for something important?
Tid Stan


 (http://i1103.photobucket.com/albums/g480/danzigfan1/IMAG0052-1.jpg)

Title: Re: Radiator question
Post by: philhoward on 28 November 2013, 09:02:13

Been a while since I had one, but I think that might be the connection for the Auto gearbox oil cooler?

Title: Re: Radiator question
Post by: danzigfan on 28 November 2013, 09:07:17

Thanks, but can I ignore those two and just put a screw + o ring in it?

Title: Re: Radiator question
Post by: philhoward on 28 November 2013, 09:18:08

If it is for the autobox, then you can leave them as they are as there should be no connection to the water circuit (you've got a busted radiator if it is!).

Title: Re: Radiator question
Post by: danzigfan on 28 November 2013, 09:21:14

Oh...Now I get it....sorry for being dumb  :-X Thanks, I'll just go for some new coolant now and try it

Title: Re: Radiator question
Post by: dbug on 28 November 2013, 16:24:18

They are for "in built" oil cooler for autobox ATF - pipes from auto box connect here.  If manual box just ignore them :y