Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Ralph on 10 December 2013, 23:35:28
-
I can't get my glove box open !
The lever/ handle has pulled out & stayed out, there feels to be a cylindrical part that's come out with it.
I can't get the lever / handle to go back.
Any ideas how I can get it open or what's gone wrong ?
It's dark at the moment so I'll have another look in daylight, it seems to be just one thing after the other at the minute :'(
-
There's a guide in the maintenance section about this issue, although I'm not sure if it suggests how to open the glove box on the first place ???
It is a common enough problem so someone should have an idea :y
-
Handle should clip back in... kind of... can then be used sort of normally :y
You do need the glovebox open to remove it though :y
-
Mine went as well recently. I can, (ahem), put my finger in the hole left by the broken handle, and push downwards, and mine comes open.
Its going to stay that way for a while until the weather warms up. :-[
hth :y
-
Try pushing the glovebox box door backwards & upwards at the same time quite firmly to take the strain off the latch and then jiggle the lock handle back into place :y
-
Finger through aperture and push down..as stated..easy peasy. :y
-
Thanks all, I've got in to it pins are :ybroken on catch, new one required now. :y
-
Thanks all, I've got in to it pins are :ybroken on catch, new one required now. :y
Have a look here :y
http://www.omegaowners.com/forum/index.php?topic=90660.0
-
Got a complete glovebox here,but it would cost a few quid to post.
-
bit of a pita to replace, cheap fix though