Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: davieboy0312 on 19 January 2014, 17:05:18

Title: help please
Post by: davieboy0312 on 19 January 2014, 17:05:18

I have a x30xe in a engine table sitting on the subframe. looking for the angle the subframe sits and the engine and radiator so I can set it all up in a jig. can anyone help please

Title: Re: help please
Post by: davieboy0312 on 03 March 2014, 20:35:58

can anyone help

Title: Re: help please
Post by: 05omegav6 on 03 March 2014, 20:43:16

Engine and subframe sit level iirc, radiator position should be easy enough to determine once the hoses are connected :-\

Think the air intake ducting bolts to the fan frame on the radiator and locates in the subframe...

Actually the radiator also sits on the subframe :y

Title: Re: help please
Post by: davieboy0312 on 03 March 2014, 21:19:43

was thinking it would be all level but not wanting to guess. im making all the hoses out of stainless steel. so not wanting to be out once I go to build it up again.