Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: idwal on 28 January 2014, 22:23:49

Title: Would these wheels fit facelift mv6 estate
Post by: idwal on 28 January 2014, 22:23:49

Am looking at a set of wheels.

2x 8,5x17 ET 30 235/45 R17

2x 9,5x17 ET 30 255/40 R17

Would these fit straight on or would I need spacers?

Any advice would be great :y

Thanks
Ken

Title: Re: Would these wheels fit facelift mv6 estate
Post by: MV6Matt on 29 January 2014, 20:38:01

Not sure that front wheels (presumably the 8J) would work with that ET - technically the Omega ET range is 33-39, Spacers might work.

Rears on a 9 wont be a problem I don't think but 255 with that side wall will put the speedo out a bit

Presumably Pcd is 110 and Centre Bore 65.1?

Pictures? Alloy manufacturer?

Title: Re: Would these wheels fit facelift mv6 estate
Post by: idwal on 29 January 2014, 22:31:29

Wheels are from Germany ebay 380822516398

Supposed to be from omega

Title: Re: Would these wheels fit facelift mv6 estate
Post by: 05omegav6 on 30 January 2014, 00:49:45

Theses?

http://www.ebay.de/itm/380822516398?ru=http%3A%2F%2Fwww.ebay.de%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D380822516398%26_rdc%3D1

Rears will fit... fronts will bolt on but will likely foul the wheel arch/liner under load and on full lock, might also rub on the strut, depending on camber/tyres :-\

ET30 is fine noting above :y standard 17"s are ET33 and the official Omega Irmscher Sportstars are ET30 as well :y

Profile differences won't make much difference to the speedo against standard as the ABS produces the speedo reading as an average of alll four wheel speeds, stock 17"s run 235/45/17 tyres anyway :y