Omega Owners Forum
Chat Area => General Car Chat => Topic started by: All German Parts ltd on 19 February 2014, 13:28:19
-
Hi Guys,
I hope you're all well. I hope you don't mind my doing a plug for our new web site which has gone live today. We have over the last few years, and still do business with many of you OOF members for Lemforder wishbones, steering rods etc,. For this we are very grateful. Our new website has massively improved catalogue search and functionality which means you can now drill down as below:
Year
Make
Model
Sub model
Part category
We have absolutely loads of products listed properly from many manufacturers and I hope you'll take a look (maybe even buy something.) It still has some work to do but it's a thousand times better than before. Give it a look please and maybe use the discount code I created for OOF members only:
Omega10FEB
It's not, I appreciate the same as ECP giving 800% discount today, tomorrow, this weekend and every other special occasion but the prices are as usually already competitive.
Cheers again for your support.
All the best
Jason
www.allgermanparts.co.uk (http://www.allgermanparts.co.uk)
you may need to clear your history to see the new version.
-
Fair play thats a massively enhanced parts range...Be interesting to see how some parts perform like the £6 cam cover gaskets!
-
Jason/AGP,
How long is that code valid for?
-
Fair play thats a massively enhanced parts range...Be interesting to see how some parts perform like the £6 cam cover gaskets!
Hi Jimbob,
I think it's probably a Payen without looking but I have seen Payen gaskets at Automechanika parts show with genuine VW Audi stamps on them. We also do Victor Reinz but have not uploaded the data yet.
All the best
Jason
-
Fair play thats a massively enhanced parts range...Be interesting to see how some parts perform like the £6 cam cover gaskets!
Hi Jimbob,
I think it's probably a Payen without looking but I have seen Payen gaskets at Automechanika parts show with genuine VW Audi stamps on them. We also do Victor Reinz but have not uploaded the data yet.
All the best
Jason
I suspect the reason Jimbob asked is because we have yet to find a pattern gasket that can consistently last the warranty period, thus have no choice bu to recommend horrendously expensive (even at trade) GM ones.
Even though pattern gaskets are cover by a warranty, its such a tedious job, not many fancy doing it again ;D
-
Jason/AGP,
How long is that code valid for?
Hi,
Certainly until the end of the month and may continue, although pricing is still a bit up and down and some parts are actually on too cheap due to the way we've used the pricing formula and might rise a little. Like I say work in progress but I'd rather sell to you guys a bit cheaper than our usual margin because it's extra business in addition to our regular car makes.
cheers
Jason
-
Fair play thats a massively enhanced parts range...Be interesting to see how some parts perform like the £6 cam cover gaskets!
Hi Jimbob,
I think it's probably a Payen without looking but I have seen Payen gaskets at Automechanika parts show with genuine VW Audi stamps on them. We also do Victor Reinz but have not uploaded the data yet.
All the best
Jason
I suspect the reason Jimbob asked is because we have yet to find a pattern gasket that can consistently last the warranty period, thus have no choice bu to recommend horrendously expensive (even at trade) GM ones.
Even though pattern gaskets are cover by a warranty, its such a tedious job, not many fancy doing it again ;D
I agree. I can say hand on heart we don't get any back for VAG and BMW but appreciate that different cars have different requirements.
All the best
Jason
-
Yes, its our experiences that prompted the comment.
Ill hopefully make use of the discount as am in the market for some new wishbones, and fancy trying the Meyle ones.
-
Nicely updated website, and very impressed with the range of parts :Y
Daft question, why is a LH front coil spring a different price to a RH?
-
Yes, its our experiences that prompted the comment.
Ill hopefully make use of the discount as am in the market for some new wishbones, and fancy trying the Meyle ones.
Nice choice. We have just taken an order from an OOF member for two pairs as it happens. We have some coming in special order from Germany on Monday.
All the best
Jason
-
Nicely updated website, and very impressed with the range of parts :Y
Daft question, why is a LH front coil spring a different price to a RH?
Thanks for the feedback:)
Good question actually. Do I need to put the cheaper one up a bit ;-) Seriously we just use an excel formula to calculate our selling price based on the cost. Problem is these are just part numbers to the people who price at the manufacturers and we often find price differences for no reason. Catch22 though as they sometimes do put the cheaper one up:(
-
Just placed an order for the cam cover gaskets. :y
-
Just placed an order for the cam cover gaskets. :y
Be great to see how you get on, if they prove reliable then thats an awesome price :D
-
Got to be a mistake there Jason surely :o :o
http://www.allgermanparts.co.uk/product/product?path=63_131&product_id=56246&group=5
-
Got to be a mistake there Jason surely :o :o
http://www.allgermanparts.co.uk/product/product?path=63_131&product_id=56246&group=5
Hi Rob - we have a few issues with different manufacturers using the same part number - this is one of those instances.
Its showing the febi part as drilled down on the search, but the system has brought up the information up for the Kilen spring that has the same number.
We are trying top resolve this as we speak.
Thanks for pointing this out.
Matt AGP
-
Got to be a mistake there Jason surely :o :o
http://www.allgermanparts.co.uk/product/product?path=63_131&product_id=56246&group=5
Hi Rob - we have a few issues with different manufacturers using the same part number - this is one of those instances.
Its showing the febi part as drilled down on the search, but the system has brought up the information up for the Kilen spring that has the same number.
We are trying top resolve this as we speak.
Thanks for pointing this out.
Matt AGP
No probs. :)
-
Payen cam cover gaskets are totaly useless, you will note how hard and plasticy they are when they arrive, best avoided. :y
-
Payen cam cover gaskets are totaly useless, you will note how hard and plasticy they are when they arrive, best avoided. :y
Hmmmmm, just had these in my hand and didn't notice any plasticy-ness or hardness, but then again I dont know what the Vauxhall ones are like to compare them too.
Regards
Matt AGP.
-
The genuine ones are a very compliant rubber.
I have tried Payen, FAI (the worst of the lot), genuine, some no-name ones, Elring (these were not to bad).
Do you do headgasket kits for Leyland 680 engine (Federal Mogul/Payen do them from memory)?
-
Well done, much easier to navigate than the old website. :y :y :y
-
Well done AGP. I will certainly know how well the parts last. in last few months have replaced wish bones, all gaskets and seals on head and cam belt kit including water pump, all purchased from AGPs. Time will tell. Very fast delivery. :y
-
Had a steering idler off them the other week good fast service but not fitted yet, should have weighted for the discount ::)
-
Good job with the site, much easier to find parts :y
Didn't know Meyle did brake discs.
http://www.allgermanparts.co.uk/product/product?path=63_127&product_id=14553&group=3
-
Good job with the site, much easier to find parts :y
Didn't know Meyle did brake discs.
http://www.allgermanparts.co.uk/product/product?path=63_127&product_id=14553&group=3
Thats good value, Vx are what 85+vat now for disc and pad set?
-
Well done, much easier to navigate than the old website. :y :y :y
Cheers Rods2,
Appreciate that
all the best
Jason
-
Good job with the site, much easier to find parts :y
Didn't know Meyle did brake discs.
http://www.allgermanparts.co.uk/product/product?path=63_127&product_id=14553&group=3
Cheers Chris,
Nice discs too-we sell a lot for BMW. Let me know if you fancy trying a set:)
all the best
Jason
-
Had a steering idler off them the other week good fast service but not fitted yet, should have weighted for the discount ::)
Someone's always going to be the last to miss out on a deal but let us know next time and we'll make it up to you. We're nice like that.
All the best
Jason
-
Well done AGP. I will certainly know how well the parts last. in last few months have replaced wish bones, all gaskets and seals on head and cam belt kit including water pump, all purchased from AGPs. Time will tell. Very fast delivery. :y
Hi Dave,
Thanks for that. Many improvements and new product lines and brands coming too. We appreciated your orders btw.
all the best
Jason
-
The genuine ones are a very compliant rubber.
I have tried Payen, FAI (the worst of the lot), genuine, some no-name ones, Elring (these were not to bad).
Do you do headgasket kits for Leyland 680 engine (Federal Mogul/Payen do them from memory)?
Information logged sir. Thanks for that.
680? is that in bus? Should be able to get that with a bit more info. Give us a shout
all the best
Jason
-
Good job with the site, much easier to find parts :y
Didn't know Meyle did brake discs.
http://www.allgermanparts.co.uk/product/product?path=63_127&product_id=14553&group=3
Thats good value, Vx are what 85+vat now for disc and pad set?
AGP sell individually, but still a good price *IF they can take the abuse that so many pattern ones can't*.
TB strokes chin, as needs new front discs again soon, but doesn't want to be a trailblazer again following the unsuccessful wishbone polys and SC5 incidents... ...anyone tried these discs yet?
-
Well, ordered some bits when I saw this and they've turned up already, all present and correct. :y
-
Good job with the site, much easier to find parts :y
Didn't know Meyle did brake discs.
http://www.allgermanparts.co.uk/product/product?path=63_127&product_id=14553&group=3
Thats good value, Vx are what 85+vat now for disc and pad set?
AGP sell individually, but still a good price *IF they can take the abuse that so many pattern ones can't*.
TB strokes chin, as needs new front discs again soon, but doesn't want to be a trailblazer again following the unsuccessful wishbone polys and SC5 incidents... ...anyone tried these discs yet?
I have spare oe in the garage, and will be looking 360/365 diameter from Audi q7 for the project.
Ah, q7 ....hmmm.
So after you mr Admin sir. :)
-
Bought a set of Payen cam cover gaskets (for one bank), and comparing them with the set of GM ones I already have, they appear dimensionally the same, and also the rubber appears to be as compliant at the GM ones.
I propose to fit the Payens to the drivers side bank and the GM th the other bank to allow a direct comparison - will keep members posted. Well worth trying as the cost savings over GM are very significant!!
-
Bought a set of Payen cam cover gaskets (for one bank), and comparing them with the set of GM ones I already have, they appear dimensionally the same, and also the rubber appears to be as compliant at the GM ones.
I propose to fit the Payens to the drivers side bank and the GM th the other bank to allow a direct comparison - will keep members posted. Well worth trying as the cost savings over GM are very significant!!
Indeed keep us posted, think it would need a few tests to prove they are reliable and consistent. Be amazing if they are :y
-
Good stuff dbug :y
-
Bought a set of Payen cam cover gaskets (for one bank), and comparing them with the set of GM ones I already have, they appear dimensionally the same, and also the rubber appears to be as compliant at the GM ones.
I propose to fit the Payens to the drivers side bank and the GM th the other bank to allow a direct comparison - will keep members posted. Well worth trying as the cost savings over GM are very significant!!
Brilliant :y
-
Bought a set of Payen cam cover gaskets (for one bank), and comparing them with the set of GM ones I already have, they appear dimensionally the same, and also the rubber appears to be as compliant at the GM ones.
I propose to fit the Payens to the drivers side bank and the GM th the other bank to allow a direct comparison - will keep members posted. Well worth trying as the cost savings over GM are very significant!!
Brilliant :y
I'm about to search/ stalk for your posts, but any update on this test? Suspect mine needs a set and I'm tempted by the Payen ones if they haven't exploded within 30 miles...
-
Bought a set of Payen cam cover gaskets (for one bank), and comparing them with the set of GM ones I already have, they appear dimensionally the same, and also the rubber appears to be as compliant at the GM ones.
I propose to fit the Payens to the drivers side bank and the GM th the other bank to allow a direct comparison - will keep members posted. Well worth trying as the cost savings over GM are very significant!!
Brilliant :y
I'm about to search/ stalk for your posts, but any update on this test? Suspect mine needs a set and I'm tempted by the Payen ones if they haven't exploded within 30 miles...
Not fitted yet - replied to your PM