Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: mindaz on 12 March 2014, 08:54:32
-
Hi,
I have only auto dimming rearview mirror,
want to swap standard mirror with this one,
(http://dl1.tuspics.net/IM13/i/00137/jgm3lyj0jwsv_t.jpg) (http://www.tuspics.net/jgm3lyj0jwsv) (http://dl1.tuspics.net/IM13/i/00137/xv16r4yppqjd_t.jpg) (http://www.tuspics.net/xv16r4yppqjd)
so, I am looking for rest of the wiring loom
need full set so could plug it and drive :y
does someone have?
please let me know
thanks
-
Try the headlining above the interior light :y
-
found only these 2 empty plugs ;)
I think these are not compatible with my rearview mirror plug ::)
so, still searching for correct wiring loom ;)
thanks
(http://i60.tinypic.com/24mc4sj.jpg)
-
btw, what these plugs are for? ::)
-
Smaller one plugs into the interior light, the large one on the right is the one for the mirror, and the one over to the left is for the sunroof :y
Incidentally, if you have both halves of the plug with the mirror you aquired, you can swap the pins from the plug currently fitted to the car... The pins might be a touch smaller but a dab of glue or silicon will hold them in place. I have done this to mine successfully :y
-
but rearview mirror has plug with 11 or 12 pins
and this larger plug in my car has only 6 pins,
is it possible to connect ???
-
but rearview mirror has plug with 11 or 12 pins
and this larger plug in my car has only 6 pins,
is it possible to connect ???
My bad, just had a closer look at your pic... Plug on far left is the main one for interior light, flat?
The large plug with six wires is the sunroof loom. There is another plug up there between the light and the mirror... Might be taped up or glued in a foam wrap :y
-
still searching..... :-\
-
If you only want the autodim feature just splice into existing wiring at roof light