Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: REvil71 on 14 March 2014, 10:14:12

Title: Fault code P0304
Post by: REvil71 on 14 March 2014, 10:14:12

I have used radweld yesterday for my slight leak. Ran the car for the time. Let it cool and tested. All looked good.
Went to use the car last night and it started fine but as i went to pull away it seemed to misfire. The engine management light started to flash
so i turned it off till today.
On reading the fault i have found this code. Is it a coindecense or something nasty.

Any ideas b4 i start looking would be great.

 :y

Title: Re: Fault code P0304
Post by: blackviper90210 on 14 March 2014, 10:28:07

iirc that would point to a missifre on cylinder 4.

Check your coilpacks and plug wells for any oil and condition of boots :y

Title: Re: Fault code P0304
Post by: REvil71 on 14 March 2014, 18:01:38

managed to get to plug 4
had slight damp also piece of crap by it (crap as in debris)
cleared codes and seems to be ok.
fingers crossed. :y