Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: steve6367 on 02 April 2014, 18:07:28
-
I would like the MID to just keep displaying the date when the radio is on, rather than a blank line.
Does anyone know which wire in the loom tells the MID the radio has been switched on?
Many thanks
Steve
-
I'll have a gander, but I think there is also a programming option. Might be Tech2 only though...
-
Pin 8 on MID, I think.
-
Thank you, will give it a go and report back :y
You don't happen to know which colour that is in the loom?
-
red/white or white/red, can't remember. Latter I think.
-
It was one of those, the white /red and red / white both look the same to me.
I took a chance on the one connected to 'power antenna' on the radio and snipped it and my date now stays on screen.
Many thanks for the help :y
-
It was one of those, the white /red and red / white both look the same to me.
I took a chance on the one connected to 'power antenna' on the radio and snipped it and my date now stays on screen.
Many thanks for the help :y
You're welcome