Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mickyboy123 on 19 May 2014, 17:55:38

Title: error code
Post by: mickyboy123 on 19 May 2014, 17:55:38
hi chaps, after a lot of trying with pedal trick without any luck, i resorted to buyin a code reader once again no luck wouldnt connect to the car. i finaly resorted to a garage and 50 pound to read code, as follows, PO340 camshaft position sensor no signal intermitant, my question is when i start the car sometimes the engine managment light comes on but if i turn of and restart its okay now i gues that this is the intermitant cam sensor fault. but i also have a permenent problem the car wont pull much past 3 and a half thousand revs. is could the cam sensor do that or do i have another problem :y
Title: Re: error code
Post by: tunnie on 19 May 2014, 18:00:06
As code indicates can sensor problem  :y

Genuine only part to be used here  :y
Title: Re: error code
Post by: RobG on 19 May 2014, 18:07:48
My reply ::) ::)
http://www.omegaowners.com/forum/index.php?topic=123546.msg1573120#msg1573120
Title: Re: error code
Post by: mickyboy123 on 19 May 2014, 18:16:53
okay thanx guys, you put my mind at rest im just woried it was another problem and it might be terminal
Title: Re: error code
Post by: mickyboy123 on 19 May 2014, 20:04:45
does 140 sound a fair price to have it fitted by a vauxhall main dealer thats all in including part :)
Title: Re: error code
Post by: tunnie on 19 May 2014, 20:18:31
Its a very simple job to fit yourself  :y
Title: Re: error code
Post by: mickyboy123 on 19 May 2014, 20:29:29
 how simple is a job for a novice. :o
Title: Re: error code
Post by: tunnie on 19 May 2014, 21:51:27
15mm spanner on aux belt. Few torx bolts for belt cover. Diddly bolt for sensor :)
Title: Re: error code
Post by: mickyboy123 on 20 May 2014, 06:47:47
blimey that sounds easy i will try it myself i think .today if i can get the part, :y
Title: Re: error code
Post by: RobG on 20 May 2014, 07:01:35
how simple is a job for a novice. :o
http://www.omegaowners.com/forum/index.php?topic=90628.0
Title: Re: error code
Post by: mickyboy123 on 20 May 2014, 09:35:31
thanx for the guide rob, looks straitforwd. part has just arived . and as soon as i have finished my tea im of to get stuck in, will report back latter :y
Title: Re: error code
Post by: mickyboy123 on 20 May 2014, 18:09:52
hi chaps, job done it goes like a dream now. everything is difrent gear change smother. tick over smother got twice as much pull and it over takes like a rocket. i am well pleased. thanks guys for all your help. job was fairly easy took 3 hours but why rush :y
Title: Re: error code
Post by: RobG on 20 May 2014, 18:45:27
hi chaps, job done it goes like a dream now. everything is difrent gear change smother. tick over smother got twice as much pull and it over takes like a rocket. i am well pleased. thanks guys for all your help. job was fairly easy took 3 hours but why rush :y
That include a two and half hour lunchbreak ::) ::) :y
Title: Re: error code
Post by: mickyboy123 on 20 May 2014, 19:01:18
no but did spend a lot of time drinking tea  :y