Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: robson on 11 June 2014, 12:55:30
-
Tried to search their site but found it impossible Does anyone have the part nos and prices for rear pipes and back box 03 V6 saloon, Also cat prices if you have them.
-
Their site is on eBay, they don't list DWB engines. Look for 3.0 Saloon :y
-
Most of us have been using ETS, £96.00 delivered. Full system, they only list the 3.0L but it fits the 3.2.
-
Thanks for that but does it fit the 2.6?
-
What is the chance of getting a back box off without destroying pipes.
-
Thanks for that but does it fit the 2.6?
Get 2.5 system, it's the same :y
What is the chance of getting a back box off without destroying pipes.
Sod all at best?
Easier in the long run to change the whole lot :y
-
What is the chance of getting a back box off without destroying pipes.
If the "good" section is only a few months old, maybe.
Generally, its best to change all 3 sections together. If one part has failed, the other bits are on their last legs (exhausts rot from the inside out, so a visually good exhaust will be shot after 4-6 years)
-
Thanks for that but does it fit the 2.6?
Get 2.5 system, it's the same :y
Be careful, the 3.0 / 3.2 systems have the better clamshell designed mid boxes whereas the pictures of the 2.5 / 2.6 system usually show the cheaper oval mid boxes. The clamshell boxes are much quieter and more refined, especially under acceleration and motorway cruising speeds.
I have the 3.0 / 3.2 systems from ETS on both my cars and just have some cheap exhaust tip trims on the exhaust tips to bring them in line with the bumper edge.
-
Thanks for the replies but I am now getting a little confused. Does the 3.0 and 3.2 system fit the 2.6 .Mine at the moment have clam shaped boxes,
-
Thanks VXLV6 do you have the part nos from Eternal for the 3.0/3.2.system
-
Yes they will fit :y
It may be marginally too short at the bumper end but trims would fix that :y
-
Thanks James. Ron
-
Sorry I am giving the wrong info my boxes after the cats are oval and smooth it must of been my old 2.5 that had the clams on.Must get under the car more.
-
Anybody had an exhaust from Premium Car on flyba.
-
Yes they will fit :y
It may be marginally too short at the bumper end but trims would fix that :y
OK - So the 2.5, 2.6, 3.0 and 3.2 V6's will all be able to fit the same exhaust ?????
And this is the same for the mini facelift or facelift ??? Just a shorter tailpipe on the mini facelifts ?
So Icould put a 3.2 V6 exhaust with twin rear pipes on my mini facelift 2.5 V6 ?
Andy.
-
Yup :)
Facelift bumpers are bigger, hence they are a little short.
-
Yup :)
Facelift bumpers are bigger, hence they are a little short.
Great. I need a new system on my 2.5 mini Facelift (bit of baffle was following me the other day when I booted it !!!!)
I'll get a 3.2 twin pipe clamshell on there now :y
-
3.0 system is what Eternal and most cheapy Poland places sell, but it's the same
-
Got another one from ETS yesterday for the MV6 Estate, and yes clamps are to big so another £5 refund on it's way :y
same as last time, ordered on a Friday and here from Poland the following Thursday :y and all for less than £100 :D ::)
-
Me heads spinnin' reading this thread can anyone tell me the best combination of silencers pipes etc to fit a facelift 2.5 V6 to order from eternal?
-
Me heads spinnin' reading this thread can anyone tell me the best combination of silencers pipes etc to fit a facelift 2.5 V6 to order from eternal?
Aesthetically, the 3.2 system :y failing that, the 3.0 :y
-
Will the twin tail pipe backbox fit under the rear bumper of the 2.5 facelift ?
-
Yup :y all bumpers the same regardless of engine :y
-
Is Eternals full trading name eternalcar? just want to make sure i'm going to deal with the right company
-
Is Eternal full trading name eternalcar? just want to make sure i'm going to deal with the right company
Anyone? :-\
-
Yes eternalcar on eBay :y
-
Thanks Tunnie :y