Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: PhilRich on 16 June 2014, 19:45:35

Title: Please help! Gearbox problem
Post by: PhilRich on 16 June 2014, 19:45:35
Hi de hi Oofers :)
My 2002 Desmond estate has lost all forward drive, but I can still engage Reverse :o
The indicator lights on the gearlever console all behave as they should & I don't have either the EML or Emissions telltale showing on the Dash. Plugging in my A.N.Other code reader gave a P0700 (4) Present, and it returned when cleared. I have checked the gearbox fluid level and condition of the ATF & both are ok. Any ideas please? Many thanks, Phil. :y   
Title: Re: Please help! Gearbox problem
Post by: TheBoy on 16 June 2014, 20:08:04
What codes does the TCM have?
Title: Re: Please help! Gearbox problem
Post by: PhilRich on 16 June 2014, 20:12:08
Quote from: TheBoy on 16 June 2014, 20:08:04
What codes does the TCM have?




Thanks for the early reply TB :y The TCM now shows 'Greyed Out' although it never has before,  so no help there i'm afraid ???
Title: Re: Please help! Gearbox problem
Post by: JamesV6CDX on 16 June 2014, 20:12:58
Where are you located :y
Title: Re: Please help! Gearbox problem
Post by: PhilRich on 16 June 2014, 20:18:21
Quote from: JamesV6CDX on 16 June 2014, 20:12:58
Where are you located :y


A good three days Stagecoach ride from you James (assuming only one change of horses) ;D
Seriously though, i'm in Hartlepool on the North side of the River Tees :y
Title: Re: Please help! Gearbox problem
Post by: PhilRich on 16 June 2014, 21:50:13
Update: TCM now reading (I had bent one of the pins when plugging the reader in! :-[)

Gearbox Fault Codes:

Total number of fault codes: 5

P1835 - Kickdown Switch Circuit Low Input
 (02) - Not present

P1600 - Internal Power Control Final Stage Watchdog Error
 (08) - Not present

P1781 - <Unknown DTC>
 (00) - Not present

P0730 - Gear Ratio Incorrect
 (08) - Not present

P0722 - Output Speed Sensor Circuit No Signal
 (04) - Not present


Engine Fault Codes are:

Total number of fault codes: 5

P0650 - Malfunction Indicator (MI) Control Circuit Open
 (04) - Present

P1700 - SVS request via CAN
 (00) - Not present

P0700 - MIL request from Transmission Control (TC) Modul
 (02) - Not present

P0141 - O2 Sensor 2 Heater Open Circuit
 (04) - Present

P1555 - Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load
 (00) - Not present




Title: Re: Please help! Gearbox problem
Post by: 05omegav6 on 17 June 2014, 01:15:40
Cam sensor :-\
Title: Re: Please help! Gearbox problem
Post by: PhilRich on 17 June 2014, 19:04:38
Quote from: Taxi Al on 17 June 2014, 01:15:40
Cam sensor :-\




Changed Cam Sensor for a known good one but still no joy. Thanks for the input Al, much appreciated :y
Anyone got any other ideas before I lose the will to live ??? ;D
Title: Re: Please help! Gearbox problem
Post by: Steve B on 17 June 2014, 19:20:59
Been looking at your codes :y

Here is a print out of mine from 2 year ago.

In order to get rid of them all i gave the throttle body/breathers the full clean up (maintenance guide) and put a Brand new VX cam sensor in it.

This is also a 2.2




Total number of fault codes: 5

P1555 - Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load
 (00) - Not present

P0130 - O2 Sensor 1 Open Circuit
 (04) - Not present

P0340 - Camshaft Position Sensor Circuit No Signal
 (04) - Not present

P1700 - SVS request via CAN
 (00) - Not present

P0730 - Gear Ratio Incorrect
 (08) - Not present
Title: Re: Please help! Gearbox problem
Post by: TheBoy on 17 June 2014, 19:33:38
Fix the known engine ones, and go from there. Just check ABS whilst there
Title: Re: Please help! Gearbox problem
Post by: PhilRich on 17 June 2014, 21:07:48
Thanks for your input btc, much appreciated :y
Thanks to you too once again TB, I shall do as you suggest :y