Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: onlygriffen on 22 June 2014, 17:35:52

Title: opel rear bootlid badge....what size?
Post by: onlygriffen on 22 June 2014, 17:35:52

 :)as title says guys,, does anyone know what size the equivalent opel badge for the bootlid should be ?
thanks in advance :)

Title: Re: opel rear bootlid badge....what size?
Post by: biggriffin on 22 June 2014, 19:43:00

Just look on ebay.de

Title: Re: opel rear bootlid badge....what size?
Post by: onlygriffen on 22 June 2014, 20:31:19

ebay doesnt state what badge is for what model i.e they are listed in sizes in mm

Title: Re: opel rear bootlid badge....what size?
Post by: biggriffin on 22 June 2014, 20:44:15

Measure your badge, or the grill were it wants to fit. Then you have the size..
 might be someone along who knows the size.. :)

Title: Re: opel rear bootlid badge....what size?
Post by: zirk on 22 June 2014, 20:59:12

Probably the same size as the VX one, as it needs to mate up with the two holes on the boot lid.

Title: Re: opel rear bootlid badge....what size?
Post by: Keith ABS on 23 June 2014, 08:07:41

It is posable that pfl and fl sizes are differant. What is your car?
Keith B

Title: Re: opel rear bootlid badge....what size?
Post by: VXL V6 on 23 June 2014, 23:19:51

PFL is built into the catch, FL is just stuck on the lid, centred by two holes through the lid.  :y

Title: Re: opel rear bootlid badge....what size?
Post by: Keith ABS on 24 June 2014, 07:50:15

I will have a look and see if I still have the old one from my estate and measure it
Keith B

Title: Re: opel rear bootlid badge....what size?
Post by: onlygriffen on 30 June 2014, 23:42:47

thanks guys its a 53 reg 2.2 dti elite with the 2 small holes in flat area of bootlid

Title: Re: opel rear bootlid badge....what size?
Post by: zirk on 01 July 2014, 00:11:04

Quote from: zirk on 22 June 2014, 20:59:12

Probably the same size as the VX one, as it needs to mate up with the two holes on the boot lid.

Title: Re: opel rear bootlid badge....what size?
Post by: onlygriffen on 03 July 2014, 18:37:54

Quote from: biggriffin on 22 June 2014, 20:44:15

Measure your badge, or the grill were it wants to fit. Then you have the size..
 might be someone along who knows the size.. :)

its for the bootlid, i already have the front grille badge sorted out

i dont have the original vauxhall badge was removed and binned at the coachworks

Title: Re: opel rear bootlid badge....what size?
Post by: terry paget on 05 July 2014, 16:24:57

This pic any help?
https://www.dropbox.com/s/afqe7itd59zi8pe/opelREAR40%25.JPG (https://www.dropbox.com/s/afqe7itd59zi8pe/opelREAR40%25.JPG)