Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: robson on 27 June 2014, 21:20:00
-
There is a coolant hose that goes from the auxiliary coolant pump across the front top of the rad. any pictures of the routing and clipping would be appreciated
-
Should be two clips holding it to the main fan shroud, straight across the upper back edge of it :y
-
I have found a picture in the maintainance guide which shows 1 clip on the fan shroud and a cable tie is this standard. The reason I ask is that a garage has recently replaced my rad and the pipe has marks on it that look as though clips about 10mm wide have been on it but I cannot see any clips other than the one on the shroud. and the pipe is running under the intake duct switchover valve? far too low down. Not along the top of the rad.