Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: grain.ben on 02 July 2014, 09:15:23

Title: Torx socket size for timing belt cover and cam sensor.......
Post by: grain.ben on 02 July 2014, 09:15:23

as above, anyone know off the top of their head what size torx socket i need for these, and torque settings, Taa

(2.2 4pot petrol)

Title: Re: Torx socket size for timing belt cover and cam sensor.......
Post by: omegod on 02 July 2014, 09:42:43

Not sure on the T sizes but I have done a few with 10mm and 8mm sockets. Shouldn't need to use torque settings as nipped up plus a touch should do it.

I sound like a proper bodge it man but never had an issue doing the above. ;D

Title: Re: Torx socket size for timing belt cover and cam sensor.......
Post by: tunnie on 02 July 2014, 12:10:13

Can't remember, but no need to torque really, just nipped up.

Might be E10? If you have 150 Halfrauds set, be fine  :y

Title: Re: Torx socket size for timing belt cover and cam sensor.......
Post by: grain.ben on 02 July 2014, 13:24:08

Taa chaps, I'll have to get a set sorted out, reason I asked was because im borrowing some tools and thought it would be easier just to borrow what I need.  ::)

I thought it might of been a case of nipping it up, Cheers  :y