Omega Owners Forum

Chat Area => General Car Chat => Topic started by: flyer 0712 on 04 July 2014, 12:52:15

Title: removing badges
Post by: flyer 0712 on 04 July 2014, 12:52:15

How can I remove the glue/outline from my omega where the badges are fitted as it leaves a imprint  once they are removed thanks  :y

Title: Re: removing badges
Post by: pauls on 04 July 2014, 12:58:08

I used tcut and a lot of elbow grease ;D

Title: Re: removing badges
Post by: 05omegav6 on 04 July 2014, 13:07:53

White spirit or petrol helps, but be sure to polish and wax thoroughly afterwards :y

Title: Re: removing badges
Post by: omega3000 on 04 July 2014, 13:41:53

Industrial strength glue remover , thats what i used . one wiff of the stuff knocks you off your feet  ;D Other than that white spirit  ::)

Title: Re: removing badges
Post by: Nick W on 04 July 2014, 13:49:34

Acetone.
But use it sparingly, and wipe off immediately as it can soften the paint.

Title: Re: removing badges
Post by: flyer 0712 on 04 July 2014, 17:29:19

ok folks thanks for that i will give it a go  :y

Title: Re: removing badges
Post by: biggriffin on 04 July 2014, 19:37:03

Gently heat with hair dryer, then peel badge off, then remove residue with,petrol or meths then polish :y

Title: Re: removing badges
Post by: Mr.OmegaMan on 04 July 2014, 19:50:37

Considering doing this myself, Remove the "Vauxhall" and "Omega 3.2 V6" badges off the boot lid, Would make it eaisier to clean some what :y