Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: RN55ONE on 03 August 2014, 14:00:31

Title: Offer for work
Post by: RN55ONE on 03 August 2014, 14:00:31

Hi,
I need some work doing on my Omega Facelift 3.0 V6.
The Front Multi-ram does not seem to be working. I believe it has something to do with the lower vacuum pump as the pipe that lead off it doesn't seem to be sucking any air.

I also need the following swapping:
standard manifolds for 3.2 Manifolds
standard diff for 3.2 Diff
Thermostat swap
G cam installation (so the car has 4x G Cams).

I am in the West Midlands - Walsall - M6 jct 9 or jct 10.

The car has not been used for about 1 year, apart from the occasional start up.
Let me know if you are free to do this work. I am free all week.

Title: Re: Offer for work
Post by: powerslinky on 03 August 2014, 14:49:34

Quote from: RN55ONE on 03 August 2014, 14:00:31

Hi,
I need some work doing on my Omega Facelift 3.0 V6.
The Front Multi-ram does not seem to be working. I believe it has something to do with the lower vacuum pump as the pipe that lead off it doesn't seem to be sucking any air.

I also need the following swapping:
standard manifolds for 3.2 Manifolds
standard diff for 3.2 Diff
Thermostat swap
G cam installation (so the car has 4x G Cams).

I am in the West Midlands - Walsall - M6 jct 9 or jct 10.

The car has not been used for about 1 year, apart from the occasional start up.
Let me know if you are free to do this work. I am free all week.

Just a suggestion  .  .but  a PM to Daz   (Darth Loo Knee)  he's at Stoke . .  may be fruitful  ;)

Title: Re: Offer for work
Post by: RN55ONE on 03 August 2014, 14:52:39

Cheers - will do  :y

Title: Re: Offer for work
Post by: RN55ONE on 03 August 2014, 14:56:44

I cant seem to find him in the members list  :-[

Title: Re: Offer for work
Post by: RN55ONE on 03 August 2014, 15:00:53

It's ok, found him

Title: Re: Offer for work
Post by: DrAndyB on 03 August 2014, 15:22:46

I would Recommend Daz and not hesitate to use - Certainly knows his Omegas  :y

Title: Re: Offer for work
Post by: Tall Paul on 03 August 2014, 22:24:31

+ 1  ;)  :y

Title: Re: Offer for work
Post by: RN55ONE on 05 August 2014, 17:13:46

No reply from him as of yet. Maybe he is on holiday?

Title: Re: Offer for work
Post by: powerslinky on 06 August 2014, 21:25:51

Quote from: RN55ONE on 05 August 2014, 17:13:46

No reply from him as of yet. Maybe he is on holiday?

I think he's had a bit of trouble loging in  . .  .he's back now  .  .PM him again if he's not replied as yet   :y

Title: Re: Offer for work
Post by: RN55ONE on 15 September 2014, 13:59:17

Think he is probably busy.

Is there anyone else that would consider this work? It is not urgent, but I'd like to get it done and the car back on the road this year.

Alternatively, I was thinking of breaking it, would be a shame as its only had 1 previous owner, FSH and has the full irmscher body kit.

Title: Re: Offer for work
Post by: The Red Baron on 15 September 2014, 16:33:48

would consider it if the car could come up here.