Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Mr Skrunts on 16 September 2014, 19:37:26
-
Anyone got a 3D diagram of a FL (03 2.2 CDX) front heater ventilation system.
Mine blows cold only at the front regardless of heat setting, but plenty of heat gets through for the rear seat passengers, wondering the the centre dash will have to come out to gain access etc :y
-
Anyone got a 3D diagram of a FL (03 2.2 CDX) front heater ventilation system.
Mine blows cold only at the front regardless of heat setting, but plenty of heat gets through for the rear seat passengers, wondering the the centre dash will have to come out to gain access etc :y
Have a read of this... http://www.omegaowners.com/forum/index.php?topic=90575.0 can be done by feel :y
-
I did this a few months ago and although a pain, is do-able.
I used a small screw into the arm on the motor and then slipped the lever coming down from above, onto it.
I did this as I felt mine would come off again as it didn't appear to have enough to clip onto.
HTH's :)
-
Cheers for that, sadly its a job I would be able to do as I could'nt get into that position. :y
-
Cheers for that, sadly its a job I would be able to do as I could'nt get into that position. :y
I currently work in Oxfordshire, but usually home at weekends in Worcestershire. I'm at the point where the M42/M5 meet, so depending on how close you are, I'd be more than happy to have a go for you :y