Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: relluf on 10 October 2014, 20:56:17

Title: front caliper bolts
Post by: relluf on 10 October 2014, 20:56:17

Hi
Does anyone have or know the part number for the front caliper bolts ,think they about 13mm.

I like to know the numbers ,its much easier when talking to the dealer

Title: Re: front caliper bolts
Post by: relluf on 11 October 2014, 10:12:11

That will be a no then,so does anyone know the bolt size, I need to source a replacement today and dealer says its an order job and doesn't know what size they are.

Title: Re: front caliper bolts
Post by: carswaps on 11 October 2014, 10:55:06

Just got some for my rears
M12 x 30
Think they should be the same?
Have a look here, should be listed.
http://www.partsbase.org/opel/

Title: Re: front caliper bolts
Post by: 05omegav6 on 11 October 2014, 12:30:12

Do you mean the bolts that attach the carrier to the hub, or the ones that attach the caliper to the carrier, as they are totally different :-\

Both can be reused, with threadlock if you want to be belts and braces about it :y

Title: Re: front caliper bolts
Post by: relluf on 11 October 2014, 13:33:31

Caliper to carrier!
All sorted now thanks to Halfrauds
M8 x15mm
I would have reused them ,but one had decided to do one and vanished,hence the urgency to rectify!
Cheers.

Title: Re: front caliper bolts
Post by: TheBoy on 11 October 2014, 13:35:35

93192391 - SCREW, HEX.HD., M8 X 22, BRAKE CALIPER HOUSING TO CARRIER

Title: Re: front caliper bolts
Post by: relluf on 11 October 2014, 13:46:20

Quote from: TheBoy on 11 October 2014, 13:35:35

93192391 - SCREW, HEX.HD., M8 X 22, BRAKE CALIPER HOUSING TO CARRIER

Thanks TB
I have put in M8x15  but also have x25mm do you think it will interfere if I swapped to the longer ones?

Title: Re: front caliper bolts
Post by: 05omegav6 on 11 October 2014, 14:02:28

Did the new pads not come with any bolts :-\

Going longer than 22mm might pose a problem as the holes are blind...

Nothing to stop you lopping 3mm off your 25mm ones though :y

Title: Re: front caliper bolts
Post by: relluf on 11 October 2014, 14:19:49

Quote from: Doesn't play well with others... on 11 October 2014, 14:02:28

Did the new pads not come with any bolts :-\

Going longer than 22mm might pose a problem as the holes are blind...

Nothing to stop you lopping 3mm off your 25mm ones though :y
[/quote









Its not new pads I'm doing just replacing the vanished bolt!!!

Title: Re: front caliper bolts
Post by: 05omegav6 on 11 October 2014, 14:48:15

Not entirely sure why it would be missing in the first place, but fair enough :y

Title: Re: front caliper bolts
Post by: relluf on 11 October 2014, 14:56:21

Driving along ,rattling from somewhere,investigate .oh poo caliper bolt missing!
Hence all the above!

Title: Re: front caliper bolts
Post by: symes on 11 October 2014, 19:05:05

Quote from: Franks Dad on 11 October 2014, 14:56:21

Driving along ,rattling from somewhere,investigate .oh poo caliper bolt missing!
Hence all the above!

:o :o :o :o

Title: Re: front caliper bolts
Post by: TheBoy on 12 October 2014, 10:31:13

Quote from: Franks Dad on 11 October 2014, 14:56:21

Driving along ,rattling from somewhere,investigate .oh poo caliper bolt missing!
Hence all the above!

That's a bit grim :o

I'd use longer than 15mm TBH. 25 may be a shade long, so lop a bit off.