Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Temetsy on 15 October 2014, 11:13:00
-
So the question is that is there any options like super/powerflex or BMW/Cadillac bushes for mig's rear subframe? Going to replace them anyways soon so an "premium" option would be nice ;)
-
From Pedders: Polyurethane Rear Subframe Bushings for the Pontiac GTO/Vauxhall Monaro
http://www.peddersusa.com/product/GTO-EP1145-Cradle-Bushings?gfid=p856-c1714
http://www.pedders.co.uk/urethane-cradle-mount-bush-2pkt_p4533567.htm
(http://www.ls1gto.com/forums/attachment.php?attachmentid=220898&stc=1&d=1377669968)
(http://www.ls1gto.com/forums/attachment.php?attachmentid=189241&stc=1&d=1367907402)
NOTE: I don't know if the braces pictured would fit the Omega or what benefit they would provide to go to the expense and trouble to make them fit.
-
Regarding the Pedders EP1168 bushings, they are used to mount that brace and not a substitute for the EP1145.
-
Regarding the Pedders EP1168 bushings, they are used to mount that brace and not a substitute for the EP1145.
Not seen that brace before... probably best ignored for Omega purposes as the chassis geometry is totally different :y
EP1145 is what you want :y
Just over £100 from Monkfish, listed as Monaro Rear End Pack (Harrop Diff Cover) :y
-
There's either Oe replacements from gm or lemforder. Pattern from febi.
Or poly from Pedders.
http://www.omegaowners.com/forum/index.php?topic=110208.0
As mentioned.
-
Thank you again everyone, I think I'm going for the Pedders option on this one :)